The FT101 has a huge ALC over shoot. If I use the ALC it will smack 1500 watts on the first syllable and then fall to what ever I set ALC at (example), 1000 watts.? I need to look into this issue or maybe just ignore it. Nobody seems to be able to tell on the air.?
You get the overshoot because the rig has to develop the ALC after keyup.
100k pot, 9 volt battery, plus to ground, neg from pot to ALC jack.
Set power out with pot.?
No overshoot, since ¡°ALC¡± voltage is "there" before keyup.
