Put the teflon inside the pipe before you wind the coil or use compression fittings
wa1gfz.
jmltinc@... wrote:
Hey all,
I would like to build a water cooled GS-35B for 2 meters. Although not set in
stone, the current design uses a 3" dia, 1/2wl plate line.
Am I dreaming of routing the water lines out the HV end of the line? If I
must route them out the hi-current point, any advice to getting the Teflon hoses
from the inside of the plate line?
Thanks,
John,
N9RF
