unknown electrical connector

worktoil

I'm trying to determine the best way to hook up to the connector shown in the Photos section under Miscellaneous/unknown.connector.jpg.

It is a stepper motor driver board.  I have searched the internet by the board's id and found nothing.  I can not find any product ids on the connector itself.

Any suggestions?

Thanks

Bill

Stefan Trethan

#66510

Compatible connectors are made by several companies, one of them is Phoenix
contact.
<>

ST

Show quoted text

On Wed, Jan 26, 2011 at 12:56 PM, worktoil <worktoil@...> wrote:

I'm trying to determine the best way to hook up to the connector shown in
the Photos section under Miscellaneous/unknown.connector.jpg.

It is a stepper motor driver board.  I have searched the internet by the
board's id and found nothing.  I can not find any product ids on the
connector itself.

Any suggestions?

Thanks

Bill

------------------------------------

Please trim excess when replyingYahoo! Groups Links

Maj Wright

#66542

Bill,

To connect to this connector you need a mating connector made for attaching wires.  I strongly recommend you do not solder to the connector pins.  Just makes a mess.

This looks similar to a MOLEX 2.50mm SPOX type connector.  However, the connector pins are probably on .156 or .39mm centers.

If you go to either www.mouser.com or www.digikey.com you can browse their connectors trying to find a mate.  If there is a manufactures label on the connector it would be a good start.

73, ron, n9ee/r

Show quoted text

--- In Electronics_101@..., "worktoil" <worktoil@...> wrote:

I'm trying to determine the best way to hook up to the connector shown in the Photos section under Miscellaneous/unknown.connector.jpg.

It is a stepper motor driver board.  I have searched the internet by the board's id and found nothing.  I can not find any product ids on the connector itself.

Any suggestions?

Thanks

Bill

worktoil

#66729

--- In Electronics_101@..., Stefan Trethan <stefan_trethan@...> wrote:

Compatible connectors are made by several companies, one of them is Phoenix
contact.
<>They finally arrived today and fit perfectly.  Thanks for your help.

Bill

开云体育

unknown electrical connector