Sorry Ralph away in Spain at the moment so no pictures. However it is just a box (which you could print) with the chinese aircraft connector -flying socket and male panel mount connector from AliExpress.
On 4 October 2019 7:55:22 pm "Ralph Hulslander" <rhulslander@...> wrote:
Richard, do you have some pictures? I'd love to cut the connectors off everything I own and standardize. I have no idea where to find matching male or female connector to match ones that I have, all of which are different.
Ralph
On Fri, Oct 4, 2019 at 1:26 PM les higgins via Groups.Io <leshiggins=[email protected]> wrote:
Hi good idea will try that
Regards Les
On Friday, 4 October 2019, 15:56:05 BST, Richard <edelec@...> wrote:
I just use small rectangular lidded plastic boxes which I drill for the motor wires then epoxy glue onto the motor. I fit a 4 pin chinese 16mm "aircraft plug" in the side and wire the flying socket to the cable. Has worked well for all of my motors and jobs for others.
Richard
On 4 October 2019 9:29:32 am "les higgins via Groups.Io" <leshiggins=[email protected]> wrote:
This is a generic question about termination of the wiring on the Nema motors. I would like to have a better method of termination . Is there a cover with a suitable 4 pin female connector I could get. I haven't got a 3d printer but I would be willing to purchase
-- Clausing 8520, Craftsman 12x36 Lathe, 4x12 mini lathe, 14" Delta drill press, 40 watt laser, Consew brushless DC motors and a non working 3D printer
