Charlie, and others. Why the spindle encoder? Is a multicount required to get the spindle speed?
I have seen lots of RPM devices that used one pulse others got their accuracy with 8 pulses.
So is 600 or 1200 or even 2400 pulses really required?
Is there documentation on the software you are using?
Ralph
On Tue, Aug 20, 2019 at 10:58 AM MC Cason via Groups.Io <farmerboy1967=
[email protected]> wrote:
On 8/20/19 8:50 AM, Bruce J wrote:
>> On Aug 20, 2019, at 1:05 AM, Fast Eddie <epinnell@...> wrote:
>>
>> STL of the 48T pulley with a 28mm bore if anyone wants to have a go at printing.
> A useful tip: McMaster-Carr offers STL files of virtually every mechanical component they sell, including gears.
>
?? While I applaud them for their effort, my only issue is that
McMaster-Carr only has a limited selection of tooth counts for the
various pitches they sell.
?? I haven't used it, but there is a gear generator in Fusion 360 that
is supposed to be quite good.? There are plenty of tutorials available,
including Youtube.
---Mark
--
Clausing 8520, Craftsman 12x36 Lathe, 4x12 mini lathe, 14" Delta drill press, 40 watt laser, Consew brushless DC motors and a non working 3D printer
