Mike, Thanks and OK

I got the set of three iGaging scales with EZ-DRO displays a few years ago and they worked for a while but then one of the scales started misbehaving. It is the Y scale - the 6 inches long one that jumps. The display would suddenly jump by an exact 0.2000" for no apparent reason and then jump again and again. I have tried at least three "cures" including adding an extra capacitor inside each display unit to filter out the noise. The jumping display has reduced but not disappeared. Still happens randomly. The DRO is not my trusted device currently.?

I wonder if that problem would still be around with Yurys Toy TouchDRO. If that happens it would be a waste of my money.?

-Prasad

On Tuesday, March 22, 2022, 06:27:09 PM EDT, mike allen <animal@...> wrote:

??? ??? then you should go with the Touch DRO . You need to buy the board that works with your scales , the web site should tel you which one you need & then you need a tablet & your good to go .

??? ??? animal

On 3/22/2022 1:42 PM, Prasad via groups.io wrote:

I just discovered that the 9-pin D connectors are meant to accept glass scales.. I already have the iGaging scales mounted on my mini-mill and I dont want to start all over again with glass scales,,

-Prasad

On Tuesday, March 22, 2022, 02:26:24 PM EDT, Prasad via groups.io <ad_prasad@...> wrote:

Yeah, I looked at its rear side view and it has 9 pin D style connectors which appear to be meant for the scales. I don't see any USB connector for connecting standard aluminum scales. It is obviously meant for some dedicated scales..?

-Prasad

On Tuesday, March 22, 2022, 10:03:48 AM EDT, Ralph Hulslander <rhulslander@...> wrote:

That looks like it is just the display. It does not have any DRO units!

Ralph

On Tue, Mar 22, 2022 at 7:09 AM Prasad via <ad_prasad=[email protected]> wrote:

While browsing a link I found this DRO available on Walmart.com. I don't see any scales associated with it.?

Any comments??

-Prasad

--
Clausing 8520, Craftsman 12x36 Lathe, 4x12 mini lathe, 14" Delta drill press, 40 watt laser, Consew brushless DC motors and a non working 3D printer