Re: What's everybody working on??
|
Thanks Tom,
?I made a crude jig form a small piece of wood and used alligator clips to hold the slats and braces in place to solder them in place all at once.
?It took a bit of fiddling around to get everything held in place in the jig all at once.
?The pilot steps where soldered on after everything else was soldered and still clamped in the jig.
?
?I?have ballasted around Caboose ground throws without getting them clogged with ballast and glue. I put masking tape around the ground throw then carefully ballasted? around them and the turn out. Then ballasted the rest of the track after the ballast around the turnout had dried.
?Lubing the ground throw before ballasting may work.
?
?Ray
|
