¿ªÔÆÌåÓý

  1. YamahaQY70AndQY100
  2. Messages
Single Messages Topics Expanded Polls

Re: Omni Mode?

 

The reason i wanna hook up the qy to the keystep is to have a proper keyboard to record the sounds instead of the little rubber buttons from the qy.

But sure youre right i can just use the qy separatly as a seq but u cant even hit record whilst jamming...
This thing has to stop all the time before youre able to record a sequence again...

And as far as im concerned my keystep is triggering the same channel as the qy so that shouldnt be the problem.

Its just annoying that there is no simple solution of simply turning off an omni modus...

But im grateful for all the help and whilst browsing thru all these options im optimistic ill find a soloution eventually :D

On Thu, 18 Feb 2021, 2:54 pm squishy via , <squishmusik=[email protected]> wrote:
This might be useful


There is a shift-channel-step keycombo to access MIDI channel assignments
Dunno if that will help in the right direction....but maybe its more at the QY-settings than the BSP
Just be sure to check both gear.

I guess you are triggering the QY as a sound source then.
I find it funny that you are using a sequencer to trigger another sequencer. hehe
You could instead keep the 4 tracks on the BSP for other gear....and just program the note sequence you want on the QY internal sequencer to trigger its sounds....
:/
or I am misunderstanding..

anyway..lots of tips here


On Thursday, 18 February 2021, 14:15:28 CET, Yannic Portmann <portmann.yannnic@...> wrote:


Hey eric
Yeah exactly in that case i do wanna trigger the qy via a sequencer.
I finally did find the omni on/off mode in the "insert" menue and it seems like i have to give a cc command to turn it off or something like that.
Thats a hell of a journey but it would be bad ass having this qy connected to my seqyencer including cc messages...

On Thu, 18 Feb 2021, 10:38 am Eric, <erichemingway@...> wrote:
Hi,

My apologies if I am missing something here, but my first thought would be to turn off Yamaha¡¯s (sorta pseudo) omni-mode through the menu (as opposed to thru a CC or Sysex call).? I mean I am fairly certain I have changed omni mode by using Sysex (and/or CC), ?but the menu is far simpler unless it absolutely has to be triggered thru an external synth/sequencer (which might be the case here...I mean, I just kinda skimmed the topic as I only have a few minutes right now).

Anyway, To do it thru the menu (on the either QY70 or QY100)

Press Menu->Utility->Menu(again)->Fingered Zone

Next, arrow over to MIDI CHANNEL and change (All) to whichever channel you would prefer (by pressing +/- to choose a channel 1 thru 16, or via Shift+(number/black) keys).

Again, my apologies if I am missing something or if this was already suggested.

Best Regards,
Eric

--
¡°The longest journey starts with the first step." ?- Lao Tzu
Join [email protected] to automatically receive all group messages.