TX802 MIDI Implementation Chart
This is copied from: tx-802servicenotes_text.pdf, possibly introducing a few mistakes because the text? pasted from it was the usual jumbled mess.
?
See also: Full text of Yamaha TX-802 Owner's Manual:
- that does contain the implementation chart, below, but also pastes as a jumbled mess and with a lot of typos. ?Sections that aren't tables work better.
o = Yes
x = No
Footnotes *1 to *4 are near the end
TX802
[ FM tone generater ]
Model TX802 MIDI Implementation Chart Version : 1.0
?
Function: Basic Channel
?
Default
Transmitted: 1-16
Recognized: 1-16
Remarks: memorized
?
Changed
Transmitted: 1-16
Recognized: 1-16
Remarks: memorized
?
Function: Mode
?
Default
Transmitted: x
Recognized: 1, 2, 3, 4
Remarks: memorized
?
Messages
Recognized: POLY, MONO(M=1)
Remarks: memorized
?
Altered
Transmitted: xxxxx
Recognized: x
?
Function: Note Number
?
Transmitted: x
Recognized: 0-127
?
True voice
Transmitted: xxxx
Recognized: 0-127
?
Function: Velocity
?
Note ON
Transmitted: x
Recognized: o v=1-127
?
Note OFF
Transmitted: x
Recognized: x
?
Function: Alter Touch
?
Keys
Transmitted: x
Recognized: x
?
Channels
Transmitted: x
Recognized: o
?
Function: Pitch Bender
Transmitted: x
Recognized: o 0-12 semitones *2
Remarks: 7 bit resolution
?
Function: Control Change (CC)
?
Transmitted: x
Recognized: o (as follows)
?
1 Modulation wheel *1
2 Breath control *1
4 Foot control *1
5 Portamento time *1
7 Volume *1
64 Sustain switch *1
65 Portamento switch *1
?
Function: Program Change
?
Transmitted: x
Recognized: o 0-127 *3
Remarks: only if program change switch is on
?
True voice #
Transmitted: x
Recognized: o 0-127 *3
Remarks: only if program change switch is on
?
Function: System Exclusive (Sysex)
Transmitted: o *4
Recognized: o *4
?
Function: System Common
?
Song Position
Transmitted: x
Recognized: x
?
Song Select
Transmitted: x
Recognized: x
?
Tune
Transmitted: x
Recognized: x
?
Function: System Real Time
?
Clock
Transmitted: x
Recognized: x
?
Commands
Transmitted: x
Recognized: x
?
Function: Aux Messages
?
Local ON/OFF
Transmitted: x
Recognized: x
?
All Notes OFF
Transmitted: x
Recognized: o (126, 127)
?
Active Sense
Transmitted: x
Recognized: o
?
Reset
Transmitted: x
Recognized: x
?
Notes:
?
*1 = receive CC if control change switch is on.
?
*2 = receive Pitch Bend if pitch bend switch is on.
?
*3 = Program Change I1-64 (0-63), C1-64 (64-127) for Performance.
I1-64, Cl-64, Al-64, Bl-64 (0-63) for Voice.
Remarks: only if program change switch is on
?
*4 = Sysex provides Bulk dump & parameter change of Voice, Perf, System, mtune, frac.
?
Modes:
?
Mode 1 : OMNI ON, POLY
Mode 2 : OMNI ON, MONO
Mode 3 : OMNI OFF, POLY
Mode 4 : OMNI OFF, MONO
?
o = Yes
x = No
?
AndyHornBlower