开云体育

Hello Fellows , here is the website for the DD-103 unit , all I had to do was put on the two alligator clips , the fellow?
?sent it to me set up for the FRG-7 , just put the black clip on the ground chassis and the red clip on the TP-104
?it looks like a pin sticking up with a round white insulator on it and at the top it is curled over , easy to put the alligator?
?clip on the top ,looks like the set was made for this hook up , I hooked it to a RCA plug , I just drilled a hole in the back?
?of the unit for the female part of the RCA plug , that way when I took the unit out of the cabinet I was not moving the
?wires that were attached the the TP-104 terminal , easy hook up ,I think the fellows name is Ron ,just tell him the set
?you are using the unit for and he can send it ready to go , I will attach his web site , if you scroll down his page you?
?can open up the manual for the DD-103 ,you can see the read out if I can attach a photo to this post , also I sent the?
?web page , it reads the whole number and the numbers stand out easy to see , the schematic shows where the?
?TP-104 is on the board , but if you have any trouble I can take my unit out of the cabinet and sen a photo of
?it if that helps , but I am sure you will have no problem at all ,let me know how you make out , my email address
?is rdelaplante@...?, all the very best Rick
?PS- just in case I can't load the photo on the post email me and I will send it to your email
? Te web site =?http://www.electronicspecialtyproducts.com/dd103.html