开云体育

Hi Bob, For packet, you would want to make sure you select the digirig as the sound device. You *could* build an interface that uses your built-in sound card (my packet node/Winlink gateway runs this

Ben, thanks and I will try W0STV-10 ASAP (might be a few days). From your third paragraph, for AX.25, it sounds like I can use my Digirig, USB-attached device as the “sound-card” interface, there,

Happy Friday everyone, Only 6 check-ins this week, but we did have quite a few get digipeating going which is good.? You are always free to check in using some other means if you have hardware

Hey Bob, I saw your note in your check-in about not being able to connect.? I'll quote it below in case anyone else has any input. I think I see what is going on.? If you are using VARA-FM you will

My radio does not have a serial port, so there is no “data” connection from the Digirig to the radio; there is only the 4-wire connection: Gnd, audio-in, audio-out, and PTT. The Digirig shows up

Hi Ben, et al., I don’t have 2 meter WinLink capability with my FT-818nd as yet. I have struggled with connectivity using the same Win10 PC for both my 7300 and it. I have Fldigi and WSJT-X

Hi Ben and the group. With PAT I can digi this way as well.?W0NE-10 KD9KGQ-7I just have a space between the gateway and the digi.?73, Ken?W9GM?Sent from my Galaxy

Just a quick correction for those using PAT. Apparently it's been a long time since I've used this feature and the connect string for using digipeaters has changed.? The new format is DIGI/GATEWAY.?

Hello again, everyone.? It's that time of the week. This week's exercise will be to send a message--use the standard check-in--using packet Winlink, but rather than connecting directly, connect via a

The Digirig will trigger PTT with the RTS signal. Make sure flow control is off. Usually Windows doesn't assign COM1 to a USB serial port but you never know. The digirig shows up as a Silicon Labs

I had hoped to check-in this week, using the radio, but... ...I'm running into problems, with setting-up VARA-FM. I get VU-meter response to the rig's Volume control, after opening-up the Squelch. Rig

I promise this will be my last topic for tonight. The other evening, W9GM informed me he was having issues with the W0NE-10 Winlink gateway on 145.030.? We did some testing, and discovered that

I figured I'd start a new topic for this in case there is some discussion... I have heard from a few people that Thursdays aren't ideal for this net because of work schedules.? I picked Thursday out

We had a pretty good turn-out this week.? I think I heard from everyone in the list, even if a couple of people couldn't check in this week. We also had quite the DX check-in from NA0SA using

? Hi Ben, In case I forget to check in again: I’m in a very busy time, on Thursdays right now, away from my normal check-in PC… Anyway, my Digirig and “Yaesu FT-2500M cable” arrived, so

Hi Ben, I had to lend my computer that I use for Ham radio to the bookkeeper at our church. She may have it for some time. I will try to catch up again when I have my computer back. 73, Rod KD9POL I

Hello everyone, It's time for our weekly check-in.? Since the weather is always a favorite topic for hams to complain about, there is a Winlink form for that!? Since this week's weather has been

Thanks Ben for the Net! Next time I’m going to have to double check the coordinates WinLink inserts based upon the truncated EN34sb before I submit. That being said my error indicates that I live in

We only had 8 check-ins this week, although significantly more over RF which is good progress. As promised, here is the map of the results for those that included their location:

It's time, once again, to check in to the weekly Winlink net. This week let's use the net check-in template again, but I will send a map on Friday with the reported locations. To access the template