-Hi Jeon
The Best (cheapest :>) Glow Discharge transformers are from Neon
signs you can find these on e-Bay for little money I have one 9000v -
35 ma and it seems to work fine. I use a welder to heat the
evaporation tungsten I bought .060 welding electrode tungsten and it
seems to be to large so I need a lot of amperage to get it hot I've
read of other guys using a large battery charger for the power source
and they regulate the 110v side of the charger with a dimmer switch.
I'll try to find the web site for you.
E-Beam now that's ambitious¡ªI have been studying this and not
having a lot of luck in finding the voltage / amperage and coil specs
needed. Sputtering system may be easier to deal with again finding
the source for a high voltage and high amperage source may be
difficult (expensive)Fabricating a Sputtering head seems to be
easier than E-beam.
Good Luck
Keep us posted
Ron
VacuumX@..., "jongmin686" <jongmin686@y...> wrote:
Hi, friends
Hi> I'm starting to build the Vacuum deposition system just with
a CVC
