S, o1bigtenor pi?e:
On Wed, Jun 8, 2011 at 1:12 AM, Slavko
Kocjancic
<eslavko@...>
wrote:
S, o1bigtenor pi?e:
Is suggested the Icyball because if YOU can
silver solder you can make a system which is very
cheap to run. As I am a professional welder its not
too hard for me. It is a possible solution!
I don't have equipment for silver soldering, just for soft
soldering. IcyBall seems atractive but the presence of
ammonia take me off. Long ago I checked that topic and found
a lot of problems with that and accidents. So I avoid that.
But thanks for sugesstions.
Slavko.
You use a small propane torch for the 'soft solder'? - -
and the same for silver solder (tin solder is at about 600 F
and silver solder is at about 850 F) both of which are a lot
cooler than arc welding.
Re: ammonia - - think potent window cleaning stuff. I farm too
and have worked around the high potency stuff. Have not found
it too hard to work with and would rather work with that than
R-13 (or 13a or 134 or 131 or any of the the other
organochlorofloro compounds).
Darald
It's not the amonnia itself. The high pressure AND ammonia freak's
me out.
