Hi Gordon,
I am just looking for a diffusion pump which is capable up to 600-1000L/s.
I have seen you have two pump for the system.Does one of them separate for sale?
If yes what kind of diff. pump is that?
Sizes ect..
THX.
Attila
The Hun
toggle quoted message
Show quoted text
--- In VacuumX@..., "gwaitemirrors" <gordon@...> wrote:
Hi, Everybody!
I bought an old CVC coater a few years ago, intending to fix it up and start coating telescope mirrors. But I got too busy making the mirrors, so this coater project has languished. Now it's time to sell this to somebody that has the time and energy to put her back into working order.
The bell chamber is about 23.5" in diameter, and about 27.5" tall inside. I am including a rebuilt roughing pump, and a rebuilt diffusion pump, neither of which has been used since I bought them. I did run the roughing pump for a minute to make sure it would pull a vacuum. There's also a bunch of stuff like coils, aluminum pieces, SiO, diffusion pump oil, an evaporation boat, a fixture and so forth.
I have a write-up on the system, plus many, many photos on my Web site at . Click on the coater item under the "What's New" area at the top left of the page and have a look. Enjoy yourself, and feel free to make any offer on the system that would work for you. It's gotta go, so if you want a good coater project, this is a great opportunity for you. Thanks!
Gordon Waite
Waite Research
