Seems my memory may be playing tricks with me? I didn't find, at least within that 60 foot circle, my G/P vacuum controller. I may have slipped it into one of the crates buried at the bottom of my storage container and I'll try to get to them, drag things out into the sunlight (assuming we'll have some this weekend) and get photo's.
I did find:
2 ea, Crystal Sensor Heads with approx 50 ea, 6MHZ crystals and in-vac cables - $200.00
2 ea, XMS Vacuum Deposition Controllers (1 good, 1 for spare parts) - $100.00
The above items are reserved for Andrew Aurigema (first choice since he has a working system using these items already)
1 ea, NOS ION Gauge tube - $60.00,
2 ea, diffusion pumps with gate valves and chiller boxs @ $350.00 ea.
1 ea, 18 X 1 inch SS baseplate w/mating flange & several elec. feedthroughs $350.00
2 ea, Gallon of new Vacuum Pump oil - $15.00 ea.
1 ea, approx 1/2 gallon of #704 vacuum oil (jug had a leak and I lost about half...) - $35.00
2 ea, Thermocouple vacuum gauges (Hastings) w/tubes @ $50.00 ea.
1 ea, HYVAC-28 mechanical pump - $250.00
1 ea, Welch 1397 mechanical pump - $350.00
(DUOSEAL).pdf
There's more, I just have to have some cooperation from the weather and get time to dig it all out. The above prices do include professionally made wooden shipping crates where applicable but not shipping charges.
Give me a call at home if you are interested, I don't have internet at home so I can't read email or respond until Monday evening after work. I am willing to talk trades for other useful items.
(217) 445-2023
(806) 679-0154 (wifes cell phone) I don't carry mine.
Ken
--- In VacuumX@yahoogroups .com, "Ken" wrote:
>
>
> Sorry no... I have a few 6MHZ rocks and they are promised to Drew already.
>
> Ken
>
>
> --- In VacuumX@yahoogroups .com, "Attila" wrote:
> >
> > Hi Ken,
> >
> >
> > Do you have any 5Mhz crystal for deposition sensor?
> >
> > Thx.
> > Attila
> > The Hun
> >
> > --- In VacuumX@yahoogroups .com, "Ken" wrote:
> > >
> > > Drew...
> > >
> > > Thanks for the reply on the controller. I never did hear if you had it working or not.
> > >
> > > I have 2 more of the XMS Controllers.
> > >
> > > One of them I grabbed your power supply from, so the power supply needs work. The other one (my unit) is complete but may be missing a button cap or ??? Memory fading on that. I have a crystal head and some crystals, an inside cable or 2. I'll get a handle on exactly what I have and get back to you on it. Don't know the condition as it has sat in the barn for a year now under a plastic sheet. May be good still, may be junk. Either way I'll let you know. Make an offer for all I can find...
> > >
> > > Ken
> > >
> > >
> > > --- In VacuumX@yahoogroups .com, "Aurigema, Andrew N. (KSC-ASRC-491) [ASRC AEROSPACE]" wrote:
> > > >
> > > > Ken,
> > > >
> > > > Sorry to hear you getting out of vacuum. The controller you rebuilt for me is working great. It shows nanometers per second accumulation and total accumulation perfectly. Thanks again.
> > > >
> > > > Do you have any parts for the inficon ??? I have a spare unit but crystals or sensor heads would be nice.
> > > >
> > > > Drew
> > > >
> > > > From: VacuumX@yahoogroups .com [mailto:VacuumX@yahoogroups .com] On Behalf Of Ken
> > > > Sent: Wednesday, February 10, 2010 2:24 PM
> > > > To: VacuumX@yahoogroups .com
> > > > Subject: [VacuumX] Vacuum Equipment for sale.
> > > >
> > > >
> > > >
> > > > I have for sale a lifetime accumulation of vacuum related equipment for sale. There are 2 decent mechanical pumps, an 18" SS baseplate, two 6 inch diffusion pumps and valves with cold traps, ion gauge tubes and controllers, thermo gauges and sensors, misc valves etc. Most of these could support a working chamber or two and many more items too numerous to remember or list.
> > > >
> > > > I am also interested in Ham Radio gear to refurbish or use as a possible trade for some of this gear.
> > > >
> > > > Make me an offer and we can discuss an exchange of assets.
> > > >
> > > > Ken Hunter
> > > >
> > >
> >
>
