开云体育

Thanks Bill, fair play, that certainly gives me a general idea of the layout. Can I ask what the 2 IC's are on the front panel board ?

By the way, that was: 1. MAIN V012 upper right 2. RF V012 (combined QSE and QSD) upper left Rest are front panel and encoder Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ

Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ Owner - Operator Big Signal Ranch – K9ZC Staunton, Illinois Owner – Operator Villa Grand Piton - J68HZ Soufriere, St.

Would someone be willing to post some pics of the v12 main and rf boards, I realise the schematics have been published and I have those but the gerber files have not been released yet, I have poked

Ian: I wasn't too worried about the macro expansion as I knew it would be additive at most. There is a github page, but it's private to the Beta only right now until the final version of the software

Jack (W8TEE): Taking a gander at the source code, I noticed several potential macro gotchas in SDT.h (SDTVer049.1).? For example: #define INCREMENT_X? ? ? ? ? ?WATERFALL_RIGHT_X + 25 should be

Tom: That video is really old. I'm not sure it uses the ALP decoder. Try the new one again: https://vimeo.com/manage/videos/867003483 I reposted it after Jim Pruitt rotated it for easier viewing.

I could not locate Jack's video on Vimeo, but I did find this one: https://vimeo.com/698193354 Tom - W0RCG

Out of interest the radio is using my latest front panel. It uses a RPi Pico to interface the encoders and their switches, the touch screen and the 2 LEDs. The 18 switches are connected to the keypad

I probably have two dozen keys and one of my favorites is the micro switch Hans had on the early QCX's. Go figure... Jack, W8TEE

A friend bought the key in a charity shop and gave it to me. It had not been used so was in perfect condition. Had to get used to it after using a paddle for some years. -- John G0ORX

Looks nice! I love that straight key! Jack, W8TEE

Amazing how active the bands are when there is a contest!? CQ Worldwide DX Contest, RTTY. -- John G0ORX

THANKS for the rotation!? MUCH easier to watch.

Bill, I know, it’s an issue that remains to be seen. Time will tell (pun intended)! Paul, KI7LW

Great… is it accurate? Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ VP2EHZ Owner - Operator Big Signal Ranch – K9ZC Staunton, Illinois Owner – Operator Villa Grand

Joerg & Jack, Just soldered some pins to VBAT and GND on the Teensy, applied 3v, and the RTC is working. Thanks to everyone, Paul, KI7LW

Jim Pruitt rotated the video and it is a lot easier to watch now: https://vimeo.com/manage/videos/867003483 -- Jack, W8TEE

It was not an Ethernet chip that was removed; it was the Cortex-M0+ (IMXRT1062), which is used to flash the Cortex-M7 (MIMXRT1062DVJ6B).? My mistake.? I have not used a Teensy for years, but it’s

I was unable to see a way to correct the video. To adjust your view, tilt your head to the right. (Sorry...couldn't resist...) Jack, W8TEE