开云体育

Jack, it was from a post from several weeks ago GitHub Link <https://github.com/KI3P/SDTVer063>. Version 63-1 <https://github.com/KI3P/SDTVer063#version-63-1> This version of the code corresponds to

Where did that code come from? Jack, W8TEE

There’s a lot to that… I would suggest using the latest software version though… and start in the definitions section where the arrays are defined for the bands. Dr. William J. Schmidt - K9HZ

Its perfectly acceptable to wind turns over turns… Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ VP2EHZ Owner - Operator Big Signal Ranch – K9ZC Staunton, Illinois

I installed all of the required libraries and compiled this version. Looks good, but when I tried to do the Receiver Calibration, it worked like the directions(some of the switches were mapped

Thank you, I'll carry on, appreciate your saving me scanning over a year's of posts to the lists to check for recommended changes since my kit arrived. So wishing that I was retired already, I'll be

Your kit does not include the Teensy 4.1 or the Audio Hat, either (available from PJRC.com). The display is ordered from BuyDisplay.com and is a Chinese company so it will take some time. The correct

I was furtunate enough to received from Ron AG1P a T41 kit back in December of 2023. The plan to get to it in early 2024 didn't work out, I've just this last week gone through the box and have a good

When you get to L292 3.6 uH 20 38 T37-10 Black 20" of #28 wire, 38T on T37-10 You might want to drop down a wire size to #30 I had trouble getting the ones done with 32 turns let alone 38! #30 I was

Nice, Bob!Jack, W8TEE

Hello All - I? feel that I have learned a lot by reading posts here on the T41 adventure.? Thanks much.? In exchange, a heads up that I added more detail to the Tiny Ten page.? This is a different

here's the video for it..3 FDIM 2022 Al Peter and Jack Purdum 'T41-EP CW Decoder' | | | | | | | | | | | FDIM 2022 Al Peter and Jack Purdum 'T41-EP CW Decoder' | | |

Wow, thanks for this. There are so many open source projects out there. I had never heard of syncthing. Right now, I do it with a motley collection of scripts using rsync and NFS mounts. Not perfectly

I have a "NAS" (Network Attached Storage) device.? It's a dual RAID so it has 2 hard drives with identical data.? If one fails, the other keeps going, and it alerts you that a drive failed.? That

Can someone please explain how to turn back on 160 metres and turn off any other band in SDTVer053? I've had a go at it but it seems there are several tabs involved. Roger G8JWT

I do easy real-time and private backup of my files over my local network with Syncthing ( https://syncthing.net/ ). I have a computer running in my basement that is on all the time running Syncthing,

Very good news! phew!

All: First, my thanks to all who tried to help me solve my drive D problem. My first attempt was to remove the connector, clean and D-ox it, and replace it see what happened, Happy Day! It came up

*** Also, you can put the drive & USB adapter in the fridge or freezer, and run it from there. - Jerry, KF6VB

My sister once had a computer that stopped working.? In her case, the OS was messed up, not the hard drive.? It was easy to recover the data from the hard drive using Linux.? However, it sounds