Re: Increment Problems
|
No. All he's saying is that you need to run a line from 5V to the '+' on the encoder. You can take the 5V from any of pins 7, 8, 9, 10 on J1. Jack From: "Dennis Stage dennisstage@... [SoftwareControlledHamRadio]" To: "SoftwareControlledHamRadio@..." Sent: Tuesday, April 5, 2016 6:56 PM Subject: RE: [SoftwareControlledHamRadio] Re: Increment Problems Gary,
? Sorry, that was over my head. I am working to understand microprocessors in general, and Arduino in Particular, as fast as I can. I have amassed a significant amount of knowledge over the past few weeks, but have a ways to go. ? Are you suggesting that I make some software or hardware modification to the supply voltage of the encoder? I do not see a Vcc line. ? Still learning, ? Dennis ? To: SoftwareControlledHamRadio@... From: SoftwareControlledHamRadio@... Date: Tue, 5 Apr 2016 15:37:01 -0500 Subject: Re: [SoftwareControlledHamRadio] Re: Increment Problems ?
WA4GLI,
You might also try enabling the Vcc line to your encoder. According to the library internal pull-ups are inlace but I had a similar problem and that cured my issue. |
jjpurdum