开云体育

Dennis and Jack, I was able to fix the "increments" issue with the new code from Jack. I ended up using the file named TempVFOCode.ino and I replaced the rotary.h and rotary.cpp (lower case) in the Rotary library. I unplugged the Nano from the VFO board and loaded the new code. If I remember correctly, ?is not a good idea to load the code with the Nano mounted on the VFO board.?I put it back together and Bingo the increments are working when I push the encoder, Thanks for the help. ?

Aaron, I still hear the stations "far away". Yes, I saw your posting about the reversed wiring colors on J2 and J4 and mine also came like that. I reversed J2 with the Red + to be on the left side. For the antenna?I'm using a small piece of coax from the 49er to the BNC jack, not sure if that makes a difference. I'm going to try your recommendation by reversing the antenna leads on the board. Right now the center conductor of the coax is on the left side of J4 (looking at it with the spk and key jacks being on the bottom and J2 and J4 towards the top side of the board).?