开云体育

We ship the wireless (and wired) HC's in their individual boxes - and instructions are in those boxes. OEM's are suppose to send you that. The docs are on the CD under "Manuals/Other Instructions" and

Hi Gary, thanks for you reply but I have to say that having received it completely installed from Obsession, I do not have "the instructions included in the box with each unit" that you refer to. If

The instructions on how to change the channel were included in each box with each unit. The instructions for the base unit being slightly different from the HC unit. I'll send you a copy of it

Hi Gary my wireless HP is definitely this one ?in the picture, so most probably a Generation 3. Is there somewhere in the manual indicating how to change the channel? If yes I most probably missed

Frederic, Contact me direct and we can discuss what to look for re the ALT axis 'slipping'. As for the wireless. You mention "HP 2" ... not sure if you were saying this is a Gen2 ServoCAT system or

You can change the dip switches to avoid interference on my wireless hand pad. Richard Miller 33.51N 83.59W UC18 & DS287m ________________________________ Sent: Tuesday, August 23, 2022 7:17:35 AM To:

Hi all, last may I participated to the "Rencontres Astronomiques du Printemps" so called RAP ( https://www.astrorap.fr/index.php/marchives/40-rap2015/45-rap2022-photos ) , a star party near Le Puy en

I once had my tracking go bonkers and my issue was an intermittent connection on my encoder cable. ?Argo Navis has an encoder test that can help you troubleshoot. ?One of the gold pins on my RJ type

Richard, I am glad you are enjoying using your MallinCams with your ServoCAT driven UC18. For many years, I used my 17.5” TeleKit with ServoCAT and MallinCams to observe things not visible from my

Filippo, Hello sir! Contact me direct - lets figure out what is going on. I can tell you there is no reason why the control system, or at least the ServoCAT, would cause a move after 20 minutes...

Wow Richard you really got it made! Jim

Thank you Richard, very nice image. I tried to image a big object (M101 as shown). After 20 minutes the field shifts to a direction so I have to adjust it otherwise this big object goes away from the

Filippo, My video camera software takes care of this for me. I use Mallincam video products that can de-rotate, and correct most tracking errors. I use the DS287C camera that give me a very small

Hi Richard, Hi all, thank you for your message. I am still trying to solve a specific problem in imaging DSO with my dobson but apparently there was no way to manage it. My system is SC with Nexus

After my 2 star alignment last night I set the Argo Navis to 'From Planetaruim" and retired to my recliner. My UC18 dob "system" then sat out on my deck in range of my wifi and performed flawlessly.

There is a happy ending to this story.? Several people suggested to me that I try the Argo Navis instead of the Nexus DSC and I did. That solved my problem.? I am now able to connect my scope to

Mike, with the changes in place I do see that you are now properly working. Good to know. Have fun! Gary Myers StellarCAT

the cable, in the form of 2 wraps (3 turns) by design will "screw" itself along the surface as you go up and then the opposite direction when you go down. The dams at the end of the flat surface are

no picture - please email me direct techsupport @ sevocat .com g.

Gary, I attached a picture after making the adjustments. ?To shift the mirror box i adjusted both the teflon pads on the lateral surface of rocker arms and the pads on the inside of the rocker box