开云体育

Hello Steve, The filter will be reset upon a power cycle of Nexus DSC Pro. It is implemented this way to avoid the situations you have described - in case the filter is enabled and by the next time

Hi Serge, We checked the Nexus and we did not have a filter set. The Nexus is on Amelia's 15" Obsession. However the Nexus worked perfectly last night. Since we are just starting out, she would select

Hello Steve, Most likely you have enabled a filter in catalogues. Please go to Find->From Catalogue, press right arrow key to select ‘FILTER’ tab and change the filter to ’None’ using up/down

no need to check the front if you know you have a Gen2 handpad. The Gen2 is not compatible with a Gen3 and vice versa. g.

Thanks Gary for the info. She has the Gen 2 hand pad. And it has the slide switch for 3 different speeds. On the other hand, I have the Gen 3 on my scope. I'll check the labels on the front of the

Steve, Gen2 will use a hand pad - it has the 4 yellow buttons, a green button, and a blue one. The cord is a stereo 1/8" headphone type cable. Also on the front to the left it says PC PORT. A Gen3

Steve, Yes it has been a while. Sorry it wasn't simply using 3 digits for the Messier list objects. Jack Jack's Astro Accessories LLC 38388 Pine Street Pearl River, LA 70452-5192 985-863-2165 (Home)

Hi Jack, We'll check that possibility, but I don't think that is it. Steve PS: Been a while since we talked. HI

Thanks Mickey. We bought this scope (used) a good number of years ago, so I am going to assume it is a Gen 2. Is there a quick way to determine the gen without opening the box? I don't want to do that

Steve, I have only used anArgo Navis with my ServoCat, but is it possible that the Nexus is looking for a 3 digit number for the Messier list - like 031? Jack Jack's Astro Accessories LLC 38388 Pine

Steve forward your comments to Serge the owner of Astro Devices, he will get back to you quickly. I copied him for you but now you have the info. There are too many variables for me to guess at, are

Hi, We have recently purchased the Nexus DSC Pro and tried it last night while at the Texas Star Party. I have a question about selecting an object. We were in the Catalog Messier, and wanted M31 (or

Thanks I will try that tomorrow.

Thanks I will try that tomorrow.

You need to open ServoCAT and change three jumpers to configure it the same way as for Argo Navis - please see the attached photo. You do not need a new cable to connect the serial port on Nexus DSC

Hi Frank: Open your ServoCAT box and check that the jumpers circled in the image below are set as shown. BC

Hi I am trying to replace my sky commander with a nexus dsc pro and i am having problems with it communicating with the servocat.I need to know if I need to change the cable from the nexus dsc pro to

Hi Bill, Thanks for the link. Looks great. Appreciate the help. Jim From: [email protected] <[email protected]> on behalf of Bill Conrad via groups.io <bill@...> Date: Sunday,

Hi Jim: See this website... https://joeytroy.com/asiair-openastro-2-0-ascom/ BC

Hi Gary, Thanks for clarifying. Happy to stay tuned! jim From: [email protected] <[email protected]> on behalf of K9RX - Gary via groups.io <amateurK9RX@...> Date: Sunday, April 20,