Rajeev,
Ok ... so first off did you go in to the settings for the Sky Commander and check them? The default value is not 9600!?
Second are you sure you have the 2 jumpers behind the front jack lined up with the silked screened (white) text on the printed circuit board - marked "SC"??
Last are you sure the jumper is on covering both pins and still 4 from the end??
Gary?
------ Original Message ------
Date 3/28/2025 3:41:55 PM
Subject Re: [ServoCAT] Servocat unit not responding
?
Hi, Gary,
?
I tried again, by moving the 4th jumper to connect both pins, and trying the ServoCat with Sky Commander again.? But the red DSC light still doesn't come on.
?
I'm next going to replace the lithium battery in my AN, and see if that connects with the jumpers restored to their previous positions.? If that doesn't work, I'll need to have Bill take a look to make sure the unit is working fine.
?
Thanks again for all your help,
- Rajeev
?
