¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. R90SWORLDNET
  2. Messages
Single Messages Topics Expanded

Locked Re: R90S Brake Lever Pull Improvement

 

Some time ago I had my brake m/c re-sleeved with stainless? or brass?, I forget, but non ferrous so no rusting, to 14mm with great results. Then I swapped out the 38mm calipers to 40mm for greater leverage and added stainless lines.?

Very nice now!

Mac Kirkpatrick?

On Mon, Mar 21, 2022 at 19:27 Jerry Hale <halejl@...> wrote:
I have been considering swapping my front brake 16mm master cylinder for a 14mm from an R90/6 single disk system to increase the brake feel.

I saw this device to change a cable clutch lever mechanical ratio and was thinking that this might produce the same results at a much lowered cost and effort (converting the single master cylinder to twin disks). The one pictured is from Moose Racing and is about $35. It looks like it might be fairly easy to adapt to the under tank master cylinder.

Has anyone tried anything like this or have any thoughts on it?

--


Mac Kirkpatrick
Glenmoore, PA

"After all, what is adventure, but inconvenience, properly regarded?"
C. Donahue
Join [email protected] to automatically receive all group messages.