开云体育

Thanks very much for sharing. My new 15 UC just arrived and the digital copy of the manual is appreciated. Tom

Hi Richard, and everyone who made helpful suggestions.? First I increased the Alt axis limit from 60 to 80 and transferred this updated file in the configuration program to the scope. Then I've just

Mike, Any update on measuring your ALT backlash? Richard

Hi Gene, that's a great method, thanks.? I will try and give it a go(to)! Cheers, Mike

Gene That's a good one. Jim ?Get BlueMail for Android ?

Mike, I have a UC 22, and I use Sky Safari Pro 7 and SkyFi wireless telescope controller from SimulationCurriculum.com. Using various clamps, I clamp my iPhone to the secondary ring, and aim it

Hi, thank you, another helpful suggestion. Regards, Mike

When I first got my 22"UC, I had a similar issue. My converter was also a 12v 3 amp. I borrowed a friend's 6am converter and it worked leading me to replace the 12v 3amp with a 6 amp. I believe the SC

Hi Richard, thank you for your suggestions.? I will perform the encoder test you suggested.? I had assumed that backlash could only be compensated for via the configuration program. I am wondering

Hi Bill, ok that sounds like a possible cause.? At present the parameters entered via the ServoCAT configuration program and .dat file I last used are Altitude Axis limit = 60, Altitude backlash = 2.

Hi Frederic, thank you for your suggestions. Kind regards, Mike

Mike, I have the exact same issue using my UC18 and I am using Stellarium remotely.? The goto gives up close to the target and will reach the target on additional gotos.? The issue I have been

Hi Mike: Please read *Section 7.2 Software Current Limit for ALT over-travel prevention - "Axis Limit"* of the ServoCAT Manual. You may need to increase the altitude "Axis Limit" a bit. BC

Hi Mike, I never had the exact same problem but I would check all the altitude chain both mechanically and electrically, the connectors in and out several times, the way the altitude encoder is fixed,

Mike, I’ve not seen that issue myself. Unless someone else has a suggestion you should contact the new owner of Servocat Jim Utah Sent: Sunday, March 24, 2024 7:56 AM To: [email protected]

Hi, I have owned a Classic 20" f/4 Obsession with Argo Navis and ServoCat since 2020 an have not encountered any problems until recently.? Now after 2 star alignment, selecting an object, and

NGC2903 was an OOTW at DeepSkyForum back in 2017. Here's the

NGC 2903 is one of my favorite galaxies because of all the details. I used Pixinsight (purchased software) with 3 of the RC Astro plugins to post process this image.? 10 stacks of 20 second exposure

All, Our Obsession telescopes when combined with the LeNhance filter, the tracking system of ServoCAT, and a Mallincam Video Cameras make astrophotography more than just possible. And our large

Steve, Yes. Average and stacking significantly lowers noise.? I have not used dithering, but I believe you can use them together. I have no need for a guide camera due to the great Mallincam Sky