FYI
I have been answering you guys for an hour on 6 meter FT8 as have others.? You guys seem deaf.
On Wed, Jun 12, 2024 at 4:47?PM Jeff Otterson n1kdo via <jeffrey= [email protected]> wrote: What time for computer setup on Saturday, Dave?
What do I need to bring with me?
Jeff n1kdo On Wed, Jun 12, 2024 at 1:00?PM Joe Schippert via <joe_schippert= [email protected]> wrote:
Hi Dave,
I pinged a few 2M packet stations, these are my results using 50 W to an attic-mounted vertical: - Exchanged winlink messages via N7GRB-10 (15 miles away), digipeating thru WX4NET-6 (15.7 mi.)? could not connect directly to N7GRB.? 145.590 MHz.
- Exchanged winlink messages via AB4NX-10 (22 miles away, Stone Mt.)? 145.530 MHz.
- Went down the packet winlink contact list, could not raise any of these stations: N4ELC-10 (10 mi.); W4KIB-10 (15 mi.); WD5EMA-10 (18 mi.)
After you see if this information helps you, give me a call.? I would think we can add VaraFM without too much difficulty to your TS-2000.? The question is, can we go directly to your sound card and bypass the TNC?? If your Packet TNC is all software (like mine is), will be no problem.
73, Joe? AJ2Y
=?? =?? =?? =?? =
On Tuesday, June 11, 2024 at 10:28:21 AM EDT, Eric Howell < erhowell@...> wrote:
Dave,
I will be working on Winlink as well to get ready for FD. Haven¡¯t made a connection from Richmond yet but will be working on it.
Eric
Eric Howell Everyone is entitled to their own opinions. But they are not entitled to their own facts. ??
On Jun 11, 2024, at 9:26?AM, Joe Schippert via <joe_schippert=[email protected]> wrote:
?
Hi Dave,
I
successfully send and receive Winlink messages every week.? A half dozen or so NF ARES folks do this as
well.
First
of all, I typically use a mode called VaraFM on 2 M, or VaraHF on HF.? The last time I used the Packet Racket was
maybe three months ago.? Later on this
afternoon I will try and locate some functioning Packet stations, which I think
is the mode your TS-2000 is hard wired for.?
(I¡¯m tied up until this afternoon.)?
By the way, the status in the Winlink app is all manually self-reported,
so you know what that means.
I
will need to check my log to dig up Digipeater info, but off the top of my
head, the one I have used is in Gwinnett County.? I¡¯m not aware of a listing.
My
station consists of VaraFM software, or Packet software, decoded by an outboard
sound card connected to and from my 2 M FM rig.?
On HF, it is VaraHF software working through the built-in sound card on
my K3. There is other functional HF software, however this too is seldom used.? Vara is available in a free version that
works just fine, or a purchased version that provides significant speed and
functional improvements.
More
later!
73,
Joe? AJ2Y
=?? =?? =?? =?? =
On Monday, June 10, 2024 at 10:53:38 PM EDT, Dave Moss < davemoss@...> wrote:
Anyone in the group familiar with Winlink?? I have the software running, and all seems to be working OK, but I¡¯m not hearing/connecting with any stations.
WInlink has an option to download an update to Winlink nodes (call, frequency, location, beam heading, distance from me).? I have updated the node list in Winlink, and I tried all within 30 miles of me but I get no response.?
I¡¯ve been unable to find a list of digipeaters/nodes in the Atlanta area other than what populates the table in WINLINK.?
Seems odd that all/almost all of the nodes would not be working.? One is supposedly 3 miles from me, but nothing heard.?
Any help greatly appreciated.
Dave UW
-- Ernie Stedman 770-894-3640
|
