From: [email protected] <[email protected]> on behalf of Orchid <orchidologisthurkan@...>
Sent: Sunday, April 1, 2018 7:46 AM
To: [email protected]
Subject: [N3ZHSoftware] Connection problem

hi there!
I have M710 and there are two serial out on back. I connect my pl2303 based usb to serial cable to the dsc out and run HRI software. I set the radio address as what is shown in the set menu of the transceiver then click to start. It seems everything is ok on the software side, but there is no “remote” message on the transceiver screen, and nothing changes when I try to change frequency on the software. I also tried with ch340 based usb to serial cable but no way.
I need help.
Best 73s de TA3LKU.
Kaan