开云体育

Hey, man, any word? Sent: Wednesday, September 2, 2020 7:29 AM To: [email protected] Subject: Re: [MachCNC] Mach4 Lathe-G76 and Turn Cycles Good question! Let me talk to the guys. This slipped my

Thank You.Thats what it acts like === works ==doesn't work.I put a ten ft copper ground rod in and just tried grounding the table to the gantry.still the same.

What are the differences between 066 and 062?

It happened here. Was missing ground ! Somehow.

Are you talking about the input tab in ports and pins?i have been through that and have the ports the same .How would i check which pin they are on?

It sounds like your ports and pins got changed somehow, if you can move the Z axis check that port and see if the X and Y are on the same port, then you'll have to check your controller to see what

I have Mach 3 on a plasma machine. I recently moved the whole set up. Now my keys on the keyboard don't work for the x and y axis,the z still goes up and down with the keys.I tried setting them in

Go to Config, Select Native Units, and change it to mm there. I believe you need to reboot after doing this. Then Config, Motor Tuning, and change your steps per, max velocity, and acceleration to the

HI Guys, new to the forum here and a newbie CNC owner. I am having an issue with my MACH3 native units. Now when I set this program up I think it was set up in inches and I would like to change it to

Thanks for the link for the down load Ben

ftp://anonymous:guest@.../Mach3/Mach3Version3.043.066.exe _____ Sent: Wednesday, September 02, 2020 3:45 PM To: [email protected] Subject: [MachCNC] Clean copy of Mach3 R3.043.066 I

I can email you a copy if you want Sent: Wednesday, September 2, 2020 3:45 PM To: [email protected] Subject: [MachCNC] Clean copy of Mach3 R3.043.066 I have been trying to get a clean copy of Mach3

I have been trying to get a clean copy of Mach3 R3.043.066 The one that is on the web site is Mach3 R3.043.062 I understand that is supposed to be the most stable but I have a situation where Mach3

Good question! Let me talk to the guys. This slipped my mind. I am getting old or something :) ______________________________ Brian Barker Engineering / Devlopment ArtSoft | Newfangled Solutions

Hey, Brian, has there been any progress on the Coil Winder screens? Sent: Monday, July 6, 2020 1:35 PM To: [email protected] Subject: Re: [MachCNC] Mach4 Lathe-G76 and Turn Cycles I don't know how

Good to see you up and running… we have all been there, and likely will be again. ? Sent from my Atari 2600 Regards, -Joemac Sent: Saturday, August 29, 2020 3:07 AM To: [email protected] Subject:

Excellent! Steve

Many thanks Steve, Joe and others for help. Got there in the end, it was my error for having the Feed per rev box checked in the tool program. I found the Fanuc in the list of PP and used that but

OK, let me see if I can walk you through this.? Looks like you have already posted code from Fusion, so here goes. Load the file you want to machine. Click on "Manufacture"? (at this point you will

Thought you might be able to help them. Sent: August-28-20 10:41 AM To: 'John Dammeyer' Subject: RE: [MachCNC] Fusion 360 and Lathe Dunno what the OneCNC file is, I use the one below.. From the fusion