Re: Fusion 360 and Lathe

Stephen Muscato · 2020-08-28T20:28:12-07:00

OK, let me see if I can walk you through this. Looks like you have already posted code from Fusion, so here goes. Load the file you want to machine. Click on "Manufacture" (at this point you will need

Single Messages Topics Expanded Polls

Re: Fusion 360 and Lathe

Stephen Muscato All Messages By This Member #154522 OK, let me see if I can walk you through this.? Looks like you have already posted code from Fusion, so here goes. Load the file you want to machine. Click on "Manufacture"? (at this point you will need to have a valid setup and toolpath) Open "Actions" , then click "Post Process" At the top blue bar, (Configuration Folder) Select "Setup", then "Open Folder" A rather large tree of folders opens up, (these are all the updates!) at the bottom should be a folder labeled "Posts" Copy the file I sent you here. Then it should appear in the blue Post Configuration window along with the post you have been using. Good luck, Steve On Friday, August 28, 2020, 3:03:15 PM CDT, Emgee Radian <xpylonracer@...> wrote: Hi Steve Thanks for the file I have downloaded but not certain how to get my file processed. Marcus Posts_2020-08-28_21-54-09.jpg Fusion Post Process.jpg

View All 19 Messages

#154522

Join [email protected] to automatically receive all group messages.

开云体育

Re: Fusion 360 and Lathe