Re: Mach4 Comp new mode

开云体育

Galil is working and I will be installing one here at the shop later this month :)

So it better be a good plugin LOL

Thanks
Brian

On 3/6/2015 12:21 PM, brendon@... [mach1mach2cnc] wrote:

Show quoted text

yeeeeeeha. sounds great brian.
now just got to wait for steve murphy to release a galil plugin for 4 so i can buy more licences and convert all my big machines! that will help an awful lot if it works.lol

(ive purchased one licence and will purchase 4 more once first one is tested)

benny.

Mach 4 tool Path

#146084

Finally playing with my router in earnest and running into some issues..

Cutting air but....

Picked a simple drag chain from CNC Zone. Cut the panel down to one side.

Using Cam Bam to generate the code.

Have Mach 3 set as post because I don't see a Mach 4 post..

No tool path shows up when the gcode loads. However If I load another file the tool path shows up. Then if I close that file and reopen my gcode file both parts show up on the tool path window.

Cutting in air and not measuring the parts seems to cut right and the step downs are as expected..

Here is the file.. Help appreciated..

Garry?

( Made using CamBam - )

( Cable Carrier (1) 3/6/2015 4:51:26 PM )

( T0 : 0.125 )

G20 G90 G91.1 G64 G40

G0 Z0.2

( T0 : 0.125 )

T0 M6

( Pocket1 )

G17

M3 S1000

G0 X0.7317 Y0.432

G0 Z0.0625

G1 F10.0 Z-0.05

G2 F30.0 X0.7241 Y0.4299 I-0.0572 J0.1981

G3 X0.7245 Y0.4401 I-0.112 J0.0102

G1 Y0.4435

G1 X0.7262 Y0.4406

G3 X0.7317 Y0.432 I0.0974 J0.0563

G0 Z0.2

G0 X0.6245 Y0.8167

G0 Z0.0625

G1 F10.0 Z-0.05

G1 F30.0 X0.6229 Y0.8195

G3 X0.6174 Y0.8282 I-0.0974 J-0.0563

G2 X0.625 Y0.8302 I0.0572 J-0.1981

G3 X0.6245 Y0.82 I0.112 J-0.0102

G1 Y0.8167

G1 F10.0 X0.6745

G1 F30.0 Y0.6468

G3 X0.6829 Y0.6156 I0.0625 J0.0

G1 X0.7695 Y0.4656

G3 X0.8437 Y0.4376 I0.0541 J0.0312

G2 X0.6243 Y0.3788 I-0.1691 J0.1924

G3 X0.6745 Y0.4401 I-0.0123 J0.0613

G1 Y0.6133

G3 X0.6662 Y0.6446 I-0.0625 J0.0

G1 X0.5796 Y0.7945

G3 X0.5054 Y0.8225 I-0.0541 J-0.0313

G2 X0.7248 Y0.8813 I0.1691 J-0.1924

G3 X0.6745 Y0.82 I0.0123 J-0.0613

G1 Y0.8167

G1 F10.0 X0.6245

G1 Z-0.1

G1 F30.0 X0.6229 Y0.8195

G3 X0.6174 Y0.8282 I-0.0974 J-0.0563

G2 X0.625 Y0.8302 I0.0572 J-0.1981

G3 X0.6245 Y0.82 I0.112 J-0.0102

G1 Y0.8167

G0 Z0.2

G0 X0.7245 Y0.4435

G0 Z0.0125

G1 F10.0 Z-0.1

G1 F30.0 X0.7262 Y0.4406

G3 X0.7317 Y0.432 I0.0974 J0.0563

G2 X0.7241 Y0.4299 I-0.0572 J0.1981

G3 X0.7245 Y0.4401 I-0.112 J0.0102

G1 Y0.4435

G1 F10.0 X0.7679 Y0.4685

G1 F30.0 X0.7695 Y0.4656

G3 X0.8437 Y0.4376 I0.0541 J0.0312

G2 X0.6243 Y0.3788 I-0.1691 J0.1924

G3 X0.6745 Y0.4401 I-0.0123 J0.0613

G1 Y0.6133

G3 X0.6662 Y0.6446 I-0.0625 J0.0

G1 X0.5796 Y0.7945

G3 X0.5054 Y0.8225 I-0.0541 J-0.0313

G2 X0.7248 Y0.8813 I0.1691 J-0.1924

G3 X0.6745 Y0.82 I0.0123 J-0.0613

G1 Y0.6468

G3 X0.6829 Y0.6156 I0.0625 J0.0

G1 X0.7679 Y0.4685

G1 F10.0 X0.7245 Y0.4435

G1 Z-0.135

G1 F30.0 X0.7262 Y0.4406

G3 X0.7317 Y0.432 I0.0974 J0.0563

G2 X0.7241 Y0.4299 I-0.0572 J0.1981

G3 X0.7245 Y0.4401 I-0.112 J0.0102

G1 Y0.4435

G0 Z0.2

G0 X0.6245 Y0.8167

G0 Z-0.0375

G1 F10.0 Z-0.135

G1 F30.0 X0.6229 Y0.8195

G3 X0.6174 Y0.8282 I-0.0974 J-0.0563

G2 X0.625 Y0.8302 I0.0572 J-0.1981

G3 X0.6245 Y0.82 I0.112 J-0.0102

G1 Y0.8167

G1 F10.0 X0.6745

G1 F30.0 Y0.6468

G3 X0.6829 Y0.6156 I0.0625 J0.0

G1 X0.7695 Y0.4656

G3 X0.8437 Y0.4376 I0.0541 J0.0312

G2 X0.6243 Y0.3788 I-0.1691 J0.1924

G3 X0.6745 Y0.4401 I-0.0123 J0.0613

G1 Y0.6133

G3 X0.6662 Y0.6446 I-0.0625 J0.0

G1 X0.5796 Y0.7945

G3 X0.5054 Y0.8225 I-0.0541 J-0.0313

G2 X0.7248 Y0.8813 I0.1691 J-0.1924

G3 X0.6745 Y0.82 I0.0123 J-0.0613

G1 Y0.8167

( Pocket2 )

S1000

G0 Z0.2

G0 X0.625 Y1.4299

G0 Z0.0625

G1 F10.0 Z-0.05

G2 F30.0 X0.6174 Y1.432 I0.0495 J0.2002

G3 X0.6229 Y1.4406 I-0.0919 J0.0649

G1 X0.6245 Y1.4435

G1 Y1.4401

G3 X0.625 Y1.4299 I0.1125 J0.0

G0 Z0.2

G0 X0.7245 Y1.8167

G0 Z0.0625

G1 F10.0 Z-0.05

G1 F30.0 Y1.82

G3 X0.7241 Y1.8302 I-0.1125 J0.0

G2 X0.7317 Y1.8282 I-0.0495 J-0.2002

G3 X0.7262 Y1.8195 I0.0919 J-0.0649

G1 X0.7245 Y1.8167

G1 F10.0 X0.7679 Y1.7917

G1 F30.0 X0.6829 Y1.6446

G3 X0.6745 Y1.6133 I0.0541 J-0.0312

G1 Y1.4401

G3 X0.7248 Y1.3788 I0.0625 J0.0

G2 X0.5054 Y1.4376 I-0.0502 J0.2512

G3 X0.5796 Y1.4656 I0.02 J0.0592

G1 X0.6662 Y1.6156

G3 X0.6745 Y1.6468 I-0.0541 J0.0312

G1 Y1.82

G3 X0.6243 Y1.8813 I-0.0625 J0.0

G2 X0.8437 Y1.8225 I0.0502 J-0.2512

G3 X0.7695 Y1.7945 I-0.02 J-0.0592

G1 X0.7679 Y1.7917

G1 F10.0 X0.7245 Y1.8167

G1 Z-0.1

G1 F30.0 Y1.82

G3 X0.7241 Y1.8302 I-0.1125 J0.0

G2 X0.7317 Y1.8282 I-0.0495 J-0.2002

G3 X0.7262 Y1.8195 I0.0919 J-0.0649

G1 X0.7245 Y1.8167

G0 Z0.2

G0 X0.6245 Y1.4435

G0 Z0.0125

G1 F10.0 Z-0.1

G1 F30.0 Y1.4401

G3 X0.625 Y1.4299 I0.1125 J0.0

G2 X0.6174 Y1.432 I0.0495 J0.2002

G3 X0.6229 Y1.4406 I-0.0919 J0.0649

G1 X0.6245 Y1.4435

G1 F10.0 X0.5812 Y1.4685

G1 F30.0 X0.6662 Y1.6156

G3 X0.6745 Y1.6468 I-0.0541 J0.0312

G1 Y1.82

G3 X0.6243 Y1.8813 I-0.0625 J0.0

G2 X0.8437 Y1.8225 I0.0502 J-0.2512

G3 X0.7695 Y1.7945 I-0.02 J-0.0592

G1 X0.6829 Y1.6446

G3 X0.6745 Y1.6133 I0.0541 J-0.0312

G1 Y1.4401

G3 X0.7248 Y1.3788 I0.0625 J0.0

G2 X0.5054 Y1.4376 I-0.0502 J0.2512

G3 X0.5796 Y1.4656 I0.02 J0.0592

G1 X0.5812 Y1.4685

G1 F10.0 X0.6245 Y1.4435

G1 Z-0.135

G1 F30.0 Y1.4401

G3 X0.625 Y1.4299 I0.1125 J0.0

G2 X0.6174 Y1.432 I0.0495 J0.2002

G3 X0.6229 Y1.4406 I-0.0919 J0.0649

G1 X0.6245 Y1.4435

G0 Z0.2

G0 X0.7245 Y1.8167

G0 Z-0.0375

G1 F10.0 Z-0.135

G1 F30.0 Y1.82

G3 X0.7241 Y1.8302 I-0.1125 J0.0

G2 X0.7317 Y1.8282 I-0.0495 J-0.2002

G3 X0.7262 Y1.8195 I0.0919 J-0.0649

G1 X0.7245 Y1.8167

G1 F10.0 X0.7679 Y1.7917

G1 F30.0 X0.6829 Y1.6446

G3 X0.6745 Y1.6133 I0.0541 J-0.0312

G1 Y1.4401

G3 X0.7248 Y1.3788 I0.0625 J0.0

G2 X0.5054 Y1.4376 I-0.0502 J0.2512

G3 X0.5796 Y1.4656 I0.02 J0.0592

G1 X0.6662 Y1.6156

G3 X0.6745 Y1.6468 I-0.0541 J0.0312

G1 Y1.82

G3 X0.6243 Y1.8813 I-0.0625 J0.0

G2 X0.8437 Y1.8225 I0.0502 J-0.2512

G3 X0.7695 Y1.7945 I-0.02 J-0.0592

G1 X0.7679 Y1.7917

( Profile1 )

S1000

G0 Z0.2

G0 X1.237 Y0.6301

G0 Z0.0625

G1 F10.0 Z-0.05

G1 F30.0 Y1.6301

G3 X0.112 I-0.5625 J0.0

G1 Y0.6301

G3 X1.237 I0.5625 J0.0

G1 F10.0 Z-0.1

G1 F30.0 Y1.6301

G3 X0.112 I-0.5625 J0.0

G1 Y0.6301

G3 X1.237 I0.5625 J0.0

G1 F10.0 Z-0.135

G1 F30.0 Y1.6301

G3 X0.112 I-0.5625 J0.0

G1 Y0.6301

G3 X1.237 I0.5625 J0.0

G0 Z0.2

M5

M30

Re: Where are we in Mach 4

#146083

开云体育

Geez, Ozzie....I'd be happy if I could just get Mach4 to show up on the screen more than once per reboot.....:)

?

Andy Wander

From: mach1mach2cnc@... [mailto:mach1mach2cnc@...]
Sent: Friday, March 06, 2015 4:43 PM
To: mach1mach2cnc@...
Subject: [mach1mach2cnc] Where are we in Mach 4

?

Hi Brian,

Please tell us where we are in the grand scheme of Mach 4.?

Can we expect a package comparable to Tormach's new conversational version of Linux for both mill and lathe? Of course I own the Mill Wizard, but that does nothing like the Tormach program for lathe.?

Will we see Mach 4 with probing sequences built-in, set-up?

Many of us bought on faith, please let us in on what to expect, or is this it.

Thanks,

Jerry "Ozzie" Pryor

Where are we in Mach 4

#146082

Hi Brian,

Please tell us where we are in the grand scheme of Mach 4.?

Can we expect a package comparable to Tormach's new conversational version of Linux for both mill and lathe? Of course I own the Mill Wizard, but that does nothing like the Tormach program for lathe.?

Will we see Mach 4 with probing sequences built-in, set-up?

Many of us bought on faith, please let us in on what to expect, or is this it.

Thanks,

Jerry "Ozzie" Pryor

Re: Mach4 Comp new mode

#146081

yeeeeeeha. sounds great brian.

now just got to wait for steve murphy to release a galil plugin for 4 so i can buy more licences and convert all my big machines! that will help an awful lot if it works.lol

(ive purchased one licence and will purchase 4 more once first one is tested)

benny.

Re: Mach4 Comp new mode

#146080

I always blame that kind of error on the spell checker!? What else could it be, It can't be me!

Re: Mach4 Comp new mode

#146079

As you can see I missed the G key and hit the B... So Hello GUYS ! LOL... I need to slow the heck down!
Thanks
Brian

Show quoted text

On 3/6/2015 8:26 AM, Brian Barker brianb@... [mach1mach2cnc] wrote:
Hello buys,
I have added a new comp mode that is doing the set over like a Fanuc.
Before I used the method that Yaskawa used (put an arc around the end of
moves that needed to be joined) . There is a problem with this method
and that is that it will make a gouge on some very small moves. The
Fanuc method will prevent this but at the same time I don't think it is
as smooth or as fast cutting. So what I have done is added 2 comp modes
and you can pick how you would like the moves to link. The Gcodes are
G40.1 and G40.2 I sort of picked them out of thin air for testing at
this time. My hope is to get this out for testing next week and later
have it out for the rest of you to test. to say that this is complex is
a bit of an understatement. It took me weeks just looking at the problem
to find an elegant  solution but I really am pleased with how I was able
to get it working in the end. This should clear up the small errors a
few of you had and at the same time give you some options if you are
seeing issues.

Thanks
Brian



------------------------------------
Posted by: Brian Barker <brianb@...>
------------------------------------

www.machsupport.com - Web site Access
------------------------------------

Yahoo Groups Links

Mach4 Comp new mode

#146078

Hello buys,
I have added a new comp mode that is doing the set over like a Fanuc. Before I used the method that Yaskawa used (put an arc around the end of moves that needed to be joined) . There is a problem with this method and that is that it will make a gouge on some very small moves. The Fanuc method will prevent this but at the same time I don't think it is as smooth or as fast cutting. So what I have done is added 2 comp modes and you can pick how you would like the moves to link. The Gcodes are G40.1 and G40.2 I sort of picked them out of thin air for testing at this time. My hope is to get this out for testing next week and later have it out for the rest of you to test. to say that this is complex is a bit of an understatement. It took me weeks just looking at the problem to find an elegant  solution but I really am pleased with how I was able to get it working in the end. This should clear up the small errors a few of you had and at the same time give you some options if you are seeing issues.

Thanks
Brian

Re: Formula for axis extension

#146077

Thanks! ?Here is is doing some actual cutting:

Cheers,

Graham

?

---In mach1mach2cnc@..., <gcode.fi@...> wrote :

I think thats an excellent approach, imo.
Kudos.

?

Re: High RPM Spindle Show Me

#146076

开云体育

A water cooled spindle doesn't suck crap through it's self and is some what quieter than an air cooled.

?

In a message dated 06/03/2015 12:12:34 GMT Standard Time, mach1mach2cnc@... writes:

Show quoted text

i like that price... wondering about the type of bearings??

and to the previous poster?? what is ?the big deal with water cooling?

On Thu, Mar 5, 2015 at 10:17 PM, Spencer Chase lists@... [mach1mach2cnc] <mach1mach2cnc@...> wrote:

?

i have bought servo motors from them and they are decent quality but certainly not the best. good enough for occasional use, not for daily or commercial applications.

good to here the mill is crap, i was thinking of buying one if mine dies. better to just keep fixing it :)

On 3/4/2015 11:57 AM, 'beebear' beebear@... [mach1mach2cnc] wrote:

?

I personally would not buy from them! I purchased a complete mill from them …..what a piece of junk.

Cheap bearings and motor couplers broken within the first month of use milling plastic and wood.

?

Still working on rebuilding with better quality parts!! Big waste of $2500

?

From: mach1mach2cnc@... [mailto:mach1mach2cnc@...]
Sent: Wednesday, March 04, 2015 1:34 PM
To: mach1mach2cnc@...
Subject: [mach1mach2cnc] High RPM Spindle Show Me

?

?

Well check this out is reasonable and air cool. Anyone has any experience here to share

?

?

?

?

?

From: mach1mach2cnc@... [mailto:mach1mach2cnc@...]
Sent: Wednesday, March 04, 2015 10:24 AM
To: mach1mach2cnc@...
Subject: Re: RE: [mach1mach2cnc] SERVO motor for Z-axis

?

?

typical 3phase VFD driven water cooled spindles are 24Krpm?

...such as as my 2KW unit

?

?

Paul Tegler
ptegler@...

?

On 03/04/15, Chris microcnc_31@... [mach1mach2cnc]yahoogroups.com> wrote:

?

?

NO I need 25000 RPM spindle or motor I can use connecting to my own spindle system.

?

?

Thanks Again

?

Chris

?

From: mach1mach2cnc@yahoogroups.com [mailto:mach1mach2cnc@yahoogroups.com]
Sent: Wednesday, March 04, 2015 2:03 AM
To: mach1mach2cnc@yahoogroups.com
Subject: RE: [mach1mach2cnc] SERVO motor for Z-axis

?

?

You mean 2500 rpm?

--- Original Message ---

From: "Chris microcnc_31@msn.com [mach1mach2cnc]" <mach1mach2cnc@yahoogroups.com>
Sent: March 4, 2015 1:50 AM
To: mach1mach2cnc@yahoogroups.com
Subject: [mach1mach2cnc] SERVO motor for Z-axis

?

Hello:

?

I like to run as high as 25000 RPM?. I appreciate your candor suggestions

?

?

Thanks;

?

Chris

?

This email has been checked for viruses by Avast antivirus software.

-- Best regards, Spencer Chase 67550-Bell Springs Rd. Garberville, CA 95542 Postal service only. Laytonville, CA 95454 UPS only. Spencer@... (425) 791-0309

Re: High RPM Spindle Show Me

#146075

i like that price... wondering about the type of bearings??

and to the previous poster?? what is ?the big deal with water cooling?

Show quoted text

On Thu, Mar 5, 2015 at 10:17 PM, Spencer Chase lists@... [mach1mach2cnc] <mach1mach2cnc@...> wrote:

?
i have bought servo motors from them and they are decent quality but certainly not the best. good enough for occasional use, not for daily or commercial applications.

good to here the mill is crap, i was thinking of buying one if mine dies. better to just keep fixing it :)

On 3/4/2015 11:57 AM, 'beebear' beebear@... [mach1mach2cnc] wrote:

?

I personally would not buy from them! I purchased a complete mill from them …..what a piece of junk.

Cheap bearings and motor couplers broken within the first month of use milling plastic and wood.

?

Still working on rebuilding with better quality parts!! Big waste of $2500

?

From: mach1mach2cnc@... [mailto:mach1mach2cnc@...]
Sent: Wednesday, March 04, 2015 1:34 PM
To: mach1mach2cnc@...
Subject: [mach1mach2cnc] High RPM Spindle Show Me

?

?

Well check this out is reasonable and air cool. Anyone has any experience here to share

?

?

?

?

?

From: mach1mach2cnc@... [mailto:mach1mach2cnc@...]
Sent: Wednesday, March 04, 2015 10:24 AM
To: mach1mach2cnc@...
Subject: Re: RE: [mach1mach2cnc] SERVO motor for Z-axis

?

?

typical 3phase VFD driven water cooled spindles are 24Krpm?

...such as as my 2KW unit

?

?

Paul Tegler
ptegler@...

?

On 03/04/15, Chris microcnc_31@... [mach1mach2cnc]yahoogroups.com> wrote:

?

?

NO I need 25000 RPM spindle or motor I can use connecting to my own spindle system.

?

?

Thanks Again

?

Chris

?

From: mach1mach2cnc@yahoogroups.com [mailto:mach1mach2cnc@yahoogroups.com]
Sent: Wednesday, March 04, 2015 2:03 AM
To: mach1mach2cnc@yahoogroups.com
Subject: RE: [mach1mach2cnc] SERVO motor for Z-axis

?

?

You mean 2500 rpm?

--- Original Message ---

From: "Chris microcnc_31@msn.com [mach1mach2cnc]" <mach1mach2cnc@yahoogroups.com>
Sent: March 4, 2015 1:50 AM
To: mach1mach2cnc@yahoogroups.com
Subject: [mach1mach2cnc] SERVO motor for Z-axis

?

Hello:

?

I like to run as high as 25000 RPM?. I appreciate your candor suggestions

?

?

Thanks;

?

Chris

?

This email has been checked for viruses by Avast antivirus software.
--

Best regards, Spencer Chase
67550-Bell Springs Rd.
Garberville, CA 95542 Postal service only.
Laytonville, CA 95454 UPS only.
Spencer@...

(425) 791-0309

Re: High RPM Spindle Show Me

Spencer Chase

#146074

开云体育

i have bought servo motors from them and they are decent quality but certainly not the best. good enough for occasional use, not for daily or commercial applications.

good to here the mill is crap, i was thinking of buying one if mine dies. better to just keep fixing it :)

On 3/4/2015 11:57 AM, 'beebear' beebear@... [mach1mach2cnc] wrote:

?

I personally would not buy from them! I purchased a complete mill from them …..what a piece of junk.

Cheap bearings and motor couplers broken within the first month of use milling plastic and wood.

?

Still working on rebuilding with better quality parts!! Big waste of $2500

?

From: mach1mach2cnc@... [mailto:mach1mach2cnc@...]
Sent: Wednesday, March 04, 2015 1:34 PM
To: mach1mach2cnc@...
Subject: [mach1mach2cnc] High RPM Spindle Show Me

?

?

Well check this out is reasonable and air cool. Anyone has any experience here to share

?

?

?

?

?

From: mach1mach2cnc@... [mailto:mach1mach2cnc@...]
Sent: Wednesday, March 04, 2015 10:24 AM
To: mach1mach2cnc@...
Subject: Re: RE: [mach1mach2cnc] SERVO motor for Z-axis

?

?

typical 3phase VFD driven water cooled spindles are 24Krpm?

...such as as my 2KW unit

?

?

Paul Tegler
ptegler@...

?

On 03/04/15, Chris microcnc_31@... [mach1mach2cnc]yahoogroups.com> wrote:

?

?

NO I need 25000 RPM spindle or motor I can use connecting to my own spindle system.

?

?

Thanks Again

?

Chris

?

From: mach1mach2cnc@yahoogroups.com [mailto:mach1mach2cnc@yahoogroups.com]
Sent: Wednesday, March 04, 2015 2:03 AM
To: mach1mach2cnc@yahoogroups.com
Subject: RE: [mach1mach2cnc] SERVO motor for Z-axis

?

?

You mean 2500 rpm?

--- Original Message ---

From: "Chris microcnc_31@msn.com [mach1mach2cnc]" <mach1mach2cnc@yahoogroups.com>
Sent: March 4, 2015 1:50 AM
To: mach1mach2cnc@yahoogroups.com
Subject: [mach1mach2cnc] SERVO motor for Z-axis

?

Hello:

?

I like to run as high as 25000 RPM?. I appreciate your candor suggestions

?

?

Thanks;

?

Chris

?

This email has been checked for viruses by Avast antivirus software.

--

Best regards, Spencer Chase
67550-Bell Springs Rd.
Garberville, CA 95542 Postal service only.
Laytonville, CA 95454 UPS only.
Spencer@...

(425) 791-0309

Re: High RPM Spindle Show Me

#146073

开云体育

...was where I bought my spindle and VFD
very happy so far
but for the $$$ go for the water cooled...better longevity if you abuse it a bit
mine:

and the VFD in the videos right on those pages....

ptegler

On 3/4/2015 1:33 PM, Chris microcnc_31@... [mach1mach2cnc] wrote:

Well check this out is reasonable and air cool. Anyone has any experience here to share

?

?

?

?

?

From: mach1mach2cnc@... [mailto:mach1mach2cnc@...]
Sent: Wednesday, March 04, 2015 10:24 AM
To: mach1mach2cnc@...
Subject: Re: RE: [mach1mach2cnc] SERVO motor for Z-axis

?

?

typical 3phase VFD driven water cooled spindles are 24Krpm?

...such as as my 2KW unit

?

?

Paul Tegler
ptegler@...

?

On 03/04/15, Chris microcnc_31@... [mach1mach2cnc]yahoogroups.com> wrote:

?

?

NO I need 25000 RPM spindle or motor I can use connecting to my own spindle system.

?

?

Thanks Again

?

Chris

?

From: mach1mach2cnc@yahoogroups.com [mailto:mach1mach2cnc@yahoogroups.com]
Sent: Wednesday, March 04, 2015 2:03 AM
To: mach1mach2cnc@yahoogroups.com
Subject: RE: [mach1mach2cnc] SERVO motor for Z-axis

?

?

You mean 2500 rpm?

--- Original Message ---

From: "Chris microcnc_31@msn.com [mach1mach2cnc]" <mach1mach2cnc@yahoogroups.com>
Sent: March 4, 2015 1:50 AM
To: mach1mach2cnc@yahoogroups.com
Subject: [mach1mach2cnc] SERVO motor for Z-axis

?

Hello:

?

I like to run as high as 25000 RPM?. I appreciate your candor suggestions

?

?

Thanks;

?

Chris

?

--
Paul Tegler ptegler@...

Re: High RPM Spindle Show Me

beebear

#146072

开云体育

I personally would not buy from them! I purchased a complete mill from them …..what a piece of junk.

Cheap bearings and motor couplers broken within the first month of use milling plastic and wood.

?

Still working on rebuilding with better quality parts!! Big waste of $2500

?

Show quoted text

From: mach1mach2cnc@... [mailto:mach1mach2cnc@...]
Sent: Wednesday, March 04, 2015 1:34 PM
To: mach1mach2cnc@...
Subject: [mach1mach2cnc] High RPM Spindle Show Me

?

Well check this out is reasonable and air cool. Anyone has any experience here to share

?

From: mach1mach2cnc@... [mailto:mach1mach2cnc@...]
Sent: Wednesday, March 04, 2015 10:24 AM
To: mach1mach2cnc@...
Subject: Re: RE: [mach1mach2cnc] SERVO motor for Z-axis

?

typical 3phase VFD driven water cooled spindles are 24Krpm?

...such as as my 2KW unit

?

Paul Tegler
ptegler@...

?

On 03/04/15, Chris microcnc_31@... [mach1mach2cnc]yahoogroups.com> wrote:

?

NO I need 25000 RPM spindle or motor I can use connecting to my own spindle system.

?

Thanks Again

?

Chris

?

From: mach1mach2cnc@yahoogroups.com [mailto:mach1mach2cnc@yahoogroups.com]
Sent: Wednesday, March 04, 2015 2:03 AM
To: mach1mach2cnc@yahoogroups.com
Subject: RE: [mach1mach2cnc] SERVO motor for Z-axis

?

You mean 2500 rpm?

--- Original Message ---

From: "Chris microcnc_31@msn.com [mach1mach2cnc]" <mach1mach2cnc@yahoogroups.com>
Sent: March 4, 2015 1:50 AM
To: mach1mach2cnc@yahoogroups.com
Subject: [mach1mach2cnc] SERVO motor for Z-axis

?

Hello:

?

I like to run as high as 25000 RPM?. I appreciate your candor suggestions

?

Thanks;

?

Chris

?

This email has been checked for viruses by Avast antivirus software.

High RPM Spindle Show Me

#146071

开云体育

Well check this out is reasonable and air cool. Anyone has any experience here to share

?

Show quoted text

From: mach1mach2cnc@... [mailto:mach1mach2cnc@...]
Sent: Wednesday, March 04, 2015 10:24 AM
To: mach1mach2cnc@...
Subject: Re: RE: [mach1mach2cnc] SERVO motor for Z-axis

?

typical 3phase VFD driven water cooled spindles are 24Krpm?

...such as as my 2KW unit

?

Paul Tegler
ptegler@...

?

On 03/04/15, Chris microcnc_31@... [mach1mach2cnc]yahoogroups.com> wrote:

?

NO I need 25000 RPM spindle or motor I can use connecting to my own spindle system.

?

Thanks Again

?

Chris

?

From: mach1mach2cnc@yahoogroups.com [mailto:mach1mach2cnc@yahoogroups.com]
Sent: Wednesday, March 04, 2015 2:03 AM
To: mach1mach2cnc@yahoogroups.com
Subject: RE: [mach1mach2cnc] SERVO motor for Z-axis

?

You mean 2500 rpm?

--- Original Message ---

From: "Chris microcnc_31@msn.com [mach1mach2cnc]" <mach1mach2cnc@yahoogroups.com>
Sent: March 4, 2015 1:50 AM
To: mach1mach2cnc@yahoogroups.com
Subject: [mach1mach2cnc] SERVO motor for Z-axis

?

Hello:

?

I like to run as high as 25000 RPM?. I appreciate your candor suggestions

?

Thanks;

?

Chris

?

Re: SERVO motor for Z-axis

#146070

typical 3phase VFD driven water cooled spindles are 24Krpm?

...such as as my 2KW unit

?

Paul Tegler
ptegler@verizon.net
www.teglerizer.com

?

On 03/04/15, Chris microcnc_31@msn.com [mach1mach2cnc]yahoogroups.com> wrote:

?

NO I need 25000 RPM spindle or motor I can use connecting to my own spindle system.

?

Thanks Again

?

Chris

?

Show quoted text

From: mach1mach2cnc@yahoogroups.com [mailto:mach1mach2cnc@yahoogroups.com]
Sent: Wednesday, March 04, 2015 2:03 AM
To: mach1mach2cnc@yahoogroups.com
Subject: RE: [mach1mach2cnc] SERVO motor for Z-axis

?

You mean 2500 rpm?

--- Original Message ---

From: "Chris microcnc_31@msn.com [mach1mach2cnc]" <mach1mach2cnc@yahoogroups.com>
Sent: March 4, 2015 1:50 AM
To: mach1mach2cnc@yahoogroups.com
Subject: [mach1mach2cnc] SERVO motor for Z-axis

?

Hello:

?

I like to run as high as 25000 RPM?. I appreciate your candor suggestions

?

Thanks;

?

Chris

Re: SERVO motor for Z-axis

#146069

开云体育

NO I need 25000 RPM spindle or motor I can use connecting to my own spindle system.

?

Thanks Again

?

Chris

?

Show quoted text

From: mach1mach2cnc@... [mailto:mach1mach2cnc@...]
Sent: Wednesday, March 04, 2015 2:03 AM
To: mach1mach2cnc@...
Subject: RE: [mach1mach2cnc] SERVO motor for Z-axis

?

You mean 2500 rpm?

--- Original Message ---

From: "Chris microcnc_31@... [mach1mach2cnc]" <mach1mach2cnc@...>
Sent: March 4, 2015 1:50 AM
To: mach1mach2cnc@...
Subject: [mach1mach2cnc] SERVO motor for Z-axis

?

Hello:

?

I like to run as high as 25000 RPM?. I appreciate your candor suggestions

?

Thanks;

?

Chris

Re: SERVO motor for Z-axis

#146068

开云体育

You mean 2500 rpm?

Show quoted text

--- Original Message ---

From: "Chris microcnc_31@... [mach1mach2cnc]"
Sent: March 4, 2015 1:50 AM
To: mach1mach2cnc@...
Subject: [mach1mach2cnc] SERVO motor for Z-axis

?

Hello:

?

I like to run as high as 25000 RPM?. I appreciate your candor suggestions

?

Thanks;

?

Chris

Re: SERVO motor for Z-axis

#146067

开云体育

I dont think servo motors are available at such high speeds.
If they are, I think they might be more expensive than normal ones.

The high speed motors on e.g. Haas, are VFD driving a 3-phase motor.
(Inside the cabinet it says 40 Hp VFD).
The chinese high speed spindles are also VFD + 3phase.

Also, servos are good at positioning.

I dont think you need positioning at 25.000 rpm ?
Or rigid tapping (mind boggles) 25.000 rpm

On 03/03/2015 19:50, Chris microcnc_31@... [mach1mach2cnc] wrote:

Hello:

I like to run as high as 25000 RPM?. I appreciate your candor suggestions

Thanks;

Chris

-- 
-hanermo (cnc designs)

SERVO motor for Z-axis

#146066

开云体育

Hello:

?

I like to run as high as 25000 RPM?. I appreciate your candor suggestions

?

Thanks;

?

Chris