开云体育

----- Original Message -----
From: Robert Campbell
To: mach1mach2cnc@...
Sent: Saturday, March 01, 2003 2:18 PM
Subject: Re: [mach1mach2cnc] one limit switch or two??


Thomas,

I use one limit sensor on my Z axis, two on my X axis and one on my Y axis
with two targets.

Bob Campbell
Bob@...
www.campbelldesigns.com
Breakout board
THC board sets
CNC router plans
Stepper Motors
----- Original Message -----
From: "Thomas Powell" <tppjr@...>
To: <mach1mach2cnc@...>
Sent: Saturday, February 28, 2004 2:27 PM
Subject: Re: [mach1mach2cnc] one limit switch or two??


> Bob,
>
> Thanks, but I think what I was really asking is how many total sensors
will or should I use for my setup? Including limit and home switches.
>
> Thanks again,
>
> Thomas Powell
>
> ----- Original Message -----
> From: Robert Campbell
> To: mach1mach2cnc@...
> Sent: Saturday, March 01, 2003 7:12 AM
> Subject: Re: [mach1mach2cnc] one limit switch or two??
>
>
> Thomas,
>
> I like to use one limit sensor on each end of travel for my X and Y
axis.
> This is mostly for safety reasons.
>
> On my Y axis, I ended up placing two targets and one sensor. Mach2
knows
> the direction of travel so you can get buy with one sensor and a second
> target for the inductive proximity sensor.
>
> Bob Campbell
> Bob@...
> www.campbelldesigns.com
> Breakout board
> THC board sets
> CNC router plans
> Stepper Motors
> ----- Original Message -----
> From: "Thomas Powell" <tppjr@...>
> To: <mach1mach2cnc@...>
> Sent: Saturday, February 28, 2004 1:25 AM
> Subject: [mach1mach2cnc] one limit switch or two??
>
>
> > Using Campbell's breakout board what are the advantages and
disadvantages
> to
> > using one or two limit switches per axis?
> >
> > I will be using the Automation Direct proximity switches.
> >
> > Thanks,
> >
> > Thomas Powell
> >
> >
> >
> >
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
>
>
>
> Yahoo! Groups Sponsor
> ADVERTISEMENT
>
>
>
>
>
> --------------------------------------------------------------------------
----
> Yahoo! Groups Links
>
> a.. To visit your group on the web, go to:
>
>
> b.. To unsubscribe from this group, send an email to:
> mach1mach2cnc-unsubscribe@...
>
> c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service.
>
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>



Yahoo! Groups Sponsor
ADVERTISEMENT





------------------------------------------------------------------------------
Yahoo! Groups Links

a.. To visit your group on the web, go to:


b.. To unsubscribe from this group, send an email to:
mach1mach2cnc-unsubscribe@...

c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.