开云体育

I found that disabling the Simulator Plugin solved this problem.

Andy Wander

------------------------------------------------------------------------

*From:*Andy Wander [mailto:ohawiseguyeh@...]
*Sent:* Wednesday, March 11, 2015 12:00 PM
*To:* 'mach1mach2cnc@...'
*Subject:* RE: [mach1mach2cnc] Where are we in Mach 4

So I went a little further in the configuration(set up my pins/signals in the ESS), shut down and reran Mach4, and now, when I attempt to get back into the ESS Plugin configuration, it highlights the "Configure" button and then just sits there.

If I then close the Plugin Config window, and close Mach4, the Mach4GUI process stays up.

Looks like this PC may be more of a help than we thought.......

Andy Wander

------------------------------------------------------------------------

*From:*mach1mach2cnc@... [mailto:mach1mach2cnc@...]
*Sent:* Wednesday, March 11, 2015 9:02 AM
*To:* mach1mach2cnc@...
*Subject:* Re: [mach1mach2cnc] Where are we in Mach 4

Thank you Andy!
That was a real help for us, Steve worked on your issue for 8 hours! it was that hard to find and I think he did one heck of a job to find it that quickly!

This should help many users, we will keep pushing forward!

Thanks
Brian

On 3/10/2015 9:51 PM, 'Andy Wander' ohawiseguyeh@... <mailto:ohawiseguyeh@...> [mach1mach2cnc] wrote:

Brian and Steve spent some time on my PC with a remote connection yesterday, and were able to solve the problem by making changes in Mach4.

Brian did mention that this PC is at the low end of what is acceptable.

Thanks, Brian (and Steve)!

Andy Wander

------------------------------------------------------------------------

*From:*mach1mach2cnc@... <mailto:mach1mach2cnc@...> [mailto:mach1mach2cnc@...]
*Sent:* Monday, March 09, 2015 1:34 PM
*To:* mach1mach2cnc@... <mailto:mach1mach2cnc@...>
*Subject:* Re: [mach1mach2cnc] Where are we in Mach 4

I was thinking you where at work now :)


Sure thing.. here is the URL :


On 3/9/2015 1:24 PM, 'Andy Wander' ohawiseguyeh@... <mailto:ohawiseguyeh@...> [mach1mach2cnc] wrote:

What do I need to do to get you in there? Is there a program I need to install?

Andy Wander

------------------------------------------------------------------------

*From:*mach1mach2cnc@... <mailto:mach1mach2cnc@...> [mailto:mach1mach2cnc@...]
*Sent:* Monday, March 09, 2015 1:18 PM
*To:* mach1mach2cnc@... <mailto:mach1mach2cnc@...>
*Subject:* Re: [mach1mach2cnc] Where are we in Mach 4

We have a server here that we use... the package is called screen connect.

On 3/9/2015 10:17 AM, 'Andy Wander' ohawiseguyeh@... <mailto:ohawiseguyeh@...> [mach1mach2cnc] wrote:

Sure, Brian, I could get you in there-what remote software do you prefer?

Andy Wander

------------------------------------------------------------------------

*From:*mach1mach2cnc@... <mailto:mach1mach2cnc@...> [mailto:mach1mach2cnc@...]
*Sent:* Monday, March 09, 2015 10:04 AM
*To:* mach1mach2cnc@... <mailto:mach1mach2cnc@...>
*Subject:* Re: [mach1mach2cnc] Where are we in Mach 4

Hello Andy,
Is there any chance I could remote into that machine to see if I can see what is going wrong? Very sorry I didn't see that on the forum, I have been working on code and testing, My forum time is very limited and I count on direct contact so please feel free to contact me directly if you have an issue! I want them fixed!!!!

Thanks
Brian




On 3/9/2015 9:51 AM, 'Andy Wander' ohawiseguyeh@... <mailto:ohawiseguyeh@...> [mach1mach2cnc] wrote:

Hi Brian:

I posted on the Machsupport Forum about this. I am using an ESS, but before I even et to that point, things go haywire.

-After install of Mach4, when I try to run it, it says that "the application cannot run because the configuration is incorrect". Based on a tip from someone on the Machsupport forum, i installed Gearotic, and then manually ran the VC++ redistributable install from Gearotic, and was then able to run Mach4GUI. But after running the GUI a few times, it started to not appear on teh screen, that is, there would be a process called Mach4GUI, but I would never see it on my monitor.

-So in that state, I could run wxmach, and it does appear on my screen, but as soon as I try to setup the ESS plugin, Mach4 crashes.

Andy Wander

------------------------------------------------------------------------

*From:*mach1mach2cnc@... <mailto:mach1mach2cnc@...> [mailto:mach1mach2cnc@...]
*Sent:* Monday, March 09, 2015 9:34 AM
*To:* mach1mach2cnc@... <mailto:mach1mach2cnc@...>
*Subject:* Re: [mach1mach2cnc] Where are we in Mach 4

Andy what seems to be the issue on your machine?

What are you running for a device?

Thanks
Brian

On 3/6/2015 4:52 PM, 'Andy Wander' ohawiseguyeh@... <mailto:ohawiseguyeh@...> [mach1mach2cnc] wrote:

Geez, Ozzie....I'd be happy if I could just get Mach4 to show up on the screen more than once per reboot.....:)

Andy Wander

------------------------------------------------------------------------

*From:*mach1mach2cnc@... <mailto:mach1mach2cnc@...> [mailto:mach1mach2cnc@...]
*Sent:* Friday, March 06, 2015 4:43 PM
*To:* mach1mach2cnc@... <mailto:mach1mach2cnc@...>
*Subject:* [mach1mach2cnc] Where are we in Mach 4

Hi Brian,

Please tell us where we are in the grand scheme of Mach 4.

Can we expect a package comparable to Tormach's new conversational version of Linux for both mill and lathe? Of course I own the Mill Wizard, but that does nothing like the Tormach program for lathe.

Will we see Mach 4 with probing sequences built-in, set-up?

Many of us bought on faith, please let us in on what to expect, or is this it.

Thanks,

Jerry "Ozzie" Pryor