My mach3 works at 45khz. Every 5 seconds or so the frequency drops to 200-300hz then goes again to around 45000 . But i have never had problems regarding this. It started doing it since some version ago. Machine is working ok, outputing 4 axis at 17khz
toggle quoted message
Show quoted text
On Feb 8, 2015, at 23:40,
maleaz68@... [mach1mach2cnc] <
mach1mach2cnc@...> wrote:
?
I installed XP, Mach3 ,C11bb,used XP optimizer. Install with main Driver OK,? 4 steppers. I've had eratic results getting motors to
run, but move smoothly. Time in int. goes from 10 to?17 erraticly.? Pulse freq. varies wildly 0 to 300 or so, not 25,000. I would
appreciate any advise.
