I use manual tool change with tool change script with touch off for me to calculate Tool Length offset. With the first tool change executed in my code ¨C it is not a problem. Because the spindle is usually at the position where I manually define to do the tool change.
?
Than After the tool change the spindle start and travels to where it needs to cut. What I do noticed is this safe Z distance is quite large (about 80mm). and my maximum z-travel is 82mm. So once the cut is complete and the next tool change is initiated, the spindle stops and the machine then trigger the z-limit switch.
?
Where do I define or need to change the safe z-offset?
?
Andre
This email is free from viruses and malware because protection is active.
