Hi Brian,

That sounds great! Hope it works well. Would test it myself if the Smoothstepper plugin ever gets released.

Thanks,
Dan

On 11/11/14 10:38 PM, Brian Barker brianb@... [mach1mach2cnc] wrote:

Hello Dan,
This has been added but needs to be tested :( I have a few users that are playing with this now so we hope to have it tested out soon...

Thanks
Brian

On 11/11/2014 3:28 PM, Daniel yosefi83@... [mach1mach2cnc] wrote:

Hi Brian,

I built a 4.5m cylindrical grinder. The Z axis is calibrated for linearity to better than 0.03mm over the whole 4.5m meter travel. But I want it even more accurate. Better than that is really hard to accomplish mechanically, so I wonder if it can be done in Mach4 (as far as I know it can't be done in Mach3). I can precisely map the axis so that I have say 1000 points along the Z and a corresponding correction in the X axis to compensate for the non-linearity. Can Mach4 apply a correction in X axis for every point in Z?

Thanks,
Dan