Hello Andy,In real life i use the ucc5304 to do a floating voltage for SQ3426EV
In real life i cannot put Vss into ground, Its a floating? voltage between out and Vss.
the floating voltage goes into the gate and source of the mosfet (datasheet shown below).
the current which goes into the open mosfter afterwards flows into two rf transistors (which is represented as 1.5Ohms load)
If i put Vss=GND my load rf transistor could not be biased. Its drain will be gnd and could not be opened.
As shown in the LTspice photo below.
how can i solve this LTspice riddle?
Thanks.
/g/LTspice/photo/294810/3782670?p=Created%2C%2C%2C20%2C2%2C0%2C0
https://www.mouser.co.il/ProductDetail/Vishay-Semiconductors/SQ3426EV-T1_GE3?qs=Vcr9%2FL0R50i4QZtXcIuK7w%3D%3D&utm_id=20109199406&gad_source=1&gclid=CjwKCAjwl4yyBhAgEiwADSEjeNqw_5bdryZSNkak5BxSZxU9qIlhYUA6_d1VYtls3HSHEQ6KBMpRqRoCvIQQAvD_BwE
?
