开云体育

I may have already mentioned this- but 10M AM on 29.00/29.01/29.02 is alive and well. This morning I worked Italy. This afternoon Oregon, Washington, California and Arizona. Some vintage and homebrew

Hello Bob I am using email only because I am on a new computer and it does not know my PW, and so I can’t see which comment you are responding to, but it hardly matters. I agree with your comment

Good luck with it. The 44/117 is my favorite two piece system. Walt Cates, WD0GOF https://wd0gof.com/Hallicrafters Your past has no control over your future. Only your NOW can impact your future.

My old QTH was built in 2000. In about 2001 the GFI specs changed. The earlier ones were not built for RFI. When I used to tune up to 100watts on 40meters, all the GFIs in the kitchen tripped. I

Thanks Walt....key plugged in....thus must be the switch! Will investigate in the AM 73 Steve

This topic has strayed a long way from "A Noisy Pilot Light". There is a lot of good information here that no one will find in the future unless the topic is corrected. Bob, AF6C

I've alwayws drooled on the old RCA BAR Radio.

i probably should not be hijacking your topic, but I have many old console radio cabinets under restoration, so to easily move them, I build a custom wooden platform just big enough for each size of

If VOX works on SSB then all the cabling is ok. first, you must have a key plugged in. If the key is plugged in and it keys without pressing the key then you have a switch problem. With the power off,

Don, The downside of aging, LOL I bought the caster thingie from Harbor Frieght and cut off the vertical handles, works well, cheap too. Cheers, Randy W7CPA

Nice stuff Randy! I noticed the castors; reminds me of a costly heavy radio that came with a plywood base and small castors; presumably so it could be moved to a more comfortable position. My heavier

HI skip I am in Ontario, so people who set the codes here are not the same as at your QTH, but likely similar. You have no basement? but older ground-level floor and new upper floor I guess ? I

Well, on the bench, the VOX and CW breaking worked 100% I didn't get a chance to try my HT44 and SX117 on CW? together until this morning. The VOX works fine on SSB. On CW, the tx keys as if in MOX I

SX-101A, HT-32B, updated HT-33A with 8295, 400v screen, blower speed control and solid state rectifiers.

I just tried.

Post some pix, Randy! John K5MO

From Don: “ Where I am, I believe you can still use original 2 wire house wiring IF the wiring is GFI protected. I have used GFI’S for some time, on anything in the basement or outside, as well as

Thanks Cal. I actually placed the bezel under a microscope and it appears the lines I see are part of the plastic. It's hard to explain. LolI will purchase Novus 2 and give that a try. ChuckK3HHP? On

Sorry , i just forgot the trimmimg Don _._,_._,_

Dale thanks for your interesting update. I generally agree with your comments and here are a few more general comments, but they are not intended to contradict what you said. If one is going to trust