Re: HT44 CW Semi-breakin
¿ªÔÆÌåÓý
If? VOX works on SSB then all the cabling is ok. first, you must have a key plugged in. If the key is plugged in and it keys without pressing the key then you have a switch problem.
With the power off, switches set to CW and VOX, plug in the key and check the resistance from the top of R97 to gnd.
?Walt Cates,
WD0GOF
?
Your past has no control over your future. Only your NOW can impact your future.
From: [email protected] <[email protected]> on behalf of Steve Marquie <w8tow.sm@...>
Sent: Monday, October 3, 2022 1:36 PM To: [email protected] <[email protected]> Subject: [HallicraftersRadios] HT44 CW Semi-breakin ?
Well, on the bench, the VOX and CW breaking worked 100%
I didn't get a chance to try my HT44 and SX117 on CW? together until this morning. The VOX works fine on SSB. On CW, the tx keys as if in MOX I have used RG-62? cables for interconnect,? and the AF and Mute are connected via the octal accessory plug on the rear of the TX. Any thoughts? 73 Steve w8tow |
waltcates