Re: PS-150 PS voltages
¿ªÔÆÌåÓý
If it is a 2w resistor that is probably why it is open. The bleeder resistors are 15K 10-watt. I replace them with 20K 10-watt resistors, which reduces the heat dissipated in the chassis. It still bleads off the charge fast enough to be safe.
?Walt Cates,
WD0GOF
?
Your past has no control over your future. Only your NOW can impact your future.
From: [email protected] <[email protected]> on behalf of Lionel B <N5LB@...>
Sent: Saturday, October 29, 2022 11:38 AM To: [email protected] <[email protected]> Subject: Re: [HallicraftersRadios] PS-150 PS voltages ?
All great information and thank you.?
I have found that R201 one of two wirewound 15k 2W bleeder resistors is open. R202 is good at 14.7k.? I wouldn't have thought an open bleeder could result in high DC out.? |
waltcates