¿ªÔÆÌåÓý

Date

Re: When does the 'purge' begain for RI bannered members?

 

>>>instead of an answer, they're told where to look to find one.<<<

Ok, I¡¯ll say the quiet part aloud ¡ª this isn¡¯t mesnt to be arrogant so please don¡¯t infer that it¡¯s personal.

Because at this stage in life folks should have the skills (or should develop them) to use the MANY resources provided (MANY more than other forum/email listserves). ?And constantly being an answering service simply perpetuates everyone just firing questions rather than FIRST using those resources themselves. A LOT of someone else¡¯s time went into developing those resources and everyone should respect that.?

I do the same even as a ¡°mere¡± member of other ?(not gio) forums and on my gio forum. ?And it pisses me off when, after I point to the resource, someone else chimes in and babies them and enables the bad behavior. ?That¡¯s their choice, but they¡¯re not the one constantly responding and likely they just clicked on the resource and copy/pasted the answer to see themself in print. ?

When I ask, I¡¯ve tried to exhaust my resources,?not 100% but at least 50%. ?Sometimes i miss the mark.?

I realize everyone doesn¡¯t have the time or the skill (yet) to sleuth out things, but providing a direct link to answers is ¡°pretty darn good replying¡± in my book and 1,000% better than anyone will get elsewhere.?

All that said, if someone is in an immediate bind and needs info (like stuck on a trip and their boat engine won¡¯t start) sure, I get it and transmit it back, rather than pointing them in the right direction. ?

Theres a wide gray line, of course, when it¡¯s ¡°better¡± to simply answer and when the alternative is ¡°better¡± (however one defines ¡°better.¡±)

caveat: this is IMO and not necessarily any Mod¡¯s opinion. ?But, just sayin.?

BTW, there¡¯s a search function that would easily find the most-recent post about ¡°reverification¡± on the Beta group.?


Re: When does the 'purge' begain for RI bannered members?

 

On Thu, Mar 7, 2024 at 03:56 PM, Tommy Meehan wrote:
There was also no link provided.
It's right here!



Regards
Andy


Re: When does the 'purge' begain for RI bannered members?

 

There was no interpretation necessary. Mark Fletcher stated on March 4th he was going to wait two more weeks before removing group members in RI status. Two weeks from March 4th is March 18th. Pretty straightforward.

There was also no link provided. If you visited the Beta website looking for Mark's reply you'd have to look back almost fifty messages.

tommy meehan


Re: When does the 'purge' begain for RI bannered members?

 

On Thu, Mar 7, 2024 at 09:03 AM, Tommy Meehan wrote:
People ask a question and instead of an answer, they're told where to look to find one.
Giving them a link to the actual information prevents any misunderstandings based on someone's interpretation.? A misinterpreted statement can lead to further misunderstanding.

Duane
--
Lots of detailed information can be found in the Owners Manual and Members Manual.


Re: When does the 'purge' begain for RI bannered members?

 

I find on this group, GMF, there is a tendency at times to avoid answering questions directly. People ask a question and instead of an answer, they're told where to look to find one. In this instance, why not just answer, 'Two more weeks aprox. March 18th,' Then add that Mark Fletcher addressed this question on Beta recently. That seems pretty simple.

Give them a source to find more information, okay, but why not answer their question?

tommy meehan


Re: When does the 'purge' begain for RI bannered members?

 

On Thu, Mar 7, 2024 at 08:08 AM, Tommy Meehan wrote:
In case Paul is not a Beta member -- or anyone else
Beta, like GMF, has public archives, so Andy's link is available for all to read.

Duane
--
Lots of detailed information can be found in the Owners Manual and Members Manual.


Re: When does the 'purge' begain for RI bannered members?

 

I had asked the same question on Beta. In case Paul is not a Beta member -- or anyone else -- Mark Fletcher answered that as of Monday (March 4th) people in RI status were still reverifying. Due to that fact Mark stated (on Beta) that he'd give it another two weeks before removal. That will move the deadline to about March 18th.

tommy meehan


Re: When does the 'purge' begain for RI bannered members?

 

On Thu, Mar 7, 2024 at 08:56 AM, Epicatt2 wrote:
Gentle GMF Moderators,

Any update on this? I haven't seen any more of the RI members on my group going RS in the last three weeks. So has Mark F. said anything to update his intentions for when they will be removed?

Or at this point can we maybe now assist by removing these RIs ourselves?
See the latest topic and comments from Mark on .

Regards
Andy


When does the 'purge' begain for RI bannered members?

 

Gentle GMF Moderators,

Any update on this? I haven't seen any more of the RI members on my group going RS in the last three weeks. So has Mark F. said anything to update his intentions for when they will be removed?

Or at this point can we maybe now assist by removing these RIs ourselves?

Just wondering.

Paul M.
Owner - CostaRicaLiving ¡ª https: //groups.io/g/CostaRicaLiving
==


Re: How to have replies go to Sender and not the whole group?

 

On Wed, Mar 6, 2024 at 03:09 AM, Margot wrote:
-Is "Reply to Sender" at the bottom the only way a recipient can respond privately?
-How can I create the "icon" I want at the beginning of the group address? For that matter, how can one edit that with their own address?
For the first point there; yes. "Reply to Sender" sends the message to whoever posted the message you're replying to using their email address. "Reply to Group" uses the email address for the group itself.

On the second point, the icon, I think you need the "Cover photo" setting (Admin->Settings->Cover photo". You set the cover phot that you see on the web home page and the icon that's displayed on mobile devices.

Regards,

Derek


Re: How to have replies go to Sender and not the whole group?

 

On 06 March 2024 03:09:45 (+00:00), Margot via groups.io wrote:

-How do I write the invite e-mail so a name will be included?

That one is easy, as it shows on the invitation page, if you specify the invitation address as:

John Doe <jd@...>

Then the invitation email will start "Dear John Doe,"

Like Duane, I'm not at all clear what you are asking in your other two questions.

Malcolm.

--?
Malcolm Austen -- malcolm.austen@...


Re: How to have replies go to Sender and not the whole group?

 

On Tue, Mar 5, 2024 at 09:09 PM, Margot wrote:
questions:
Your questions aren't clear to me because of missing details, but you may find the answers on the wiki page.? Some of the information can't be changed (the boilerplate), but you can add to it to personalize it.

Duane
--
Lots of detailed information can be found in the Owners Manual and Members Manual.


How to have replies go to Sender and not the whole group?

 


Hi,
I¡¯m ironing out the kinks from my first group invite. ? Only 10 responded out of 34 e-mails. I¡¯ll send out a new invite.

questions:
-How do I write the invite e-mail so a name will be included?
-Is "Reply to Sender" at the bottom the only way a recipient can respond privately?
-How can I create the "icon" I want at the beginning of the group address? For that matter, how can one edit that with their own address?

Thanks,
Margot Shaw
-


Re: Can you check storage used in free version?

 

On Tue, Mar 5, 2024 at 08:17 PM, Rocky Offner wrote:
since the manual has no search function
For online, open the manual as a single page, then use Ctrl-F to open a search box.? If you download the PDF, you can also use Ctrl-F.

Duane
--
Lots of detailed information can be found in the Owners Manual and Members Manual.


Re: Can you check storage used in free version?

 

Thank you!

Indeed it is in the manual. I usually search using Google with a search string, "groups.io [keywords]" since the manual has no search function, but I missed this one.

Rocky


Re: New to this manager group but not Groups.io: inviting members

 

On Tue, Mar 5, 2024 at 03:40 PM, Regina Walton wrote:
Note that I'm asking here before moving on to Groups.io support email. Redirect me if this isn't the right location.?
This is the right place!

When I sent the invites to them, I noticed that only one invite was sent. I checked the member list, and neither of them is there. What might cause this???
Did you look in Admin, Invite, Sent invitations?
Did you look at Admin, Activity?

Did you use the Invite procedure??
/helpcenter/ownersmanual/1/inviting-people-to-join-a-group

If you did, did you tweak the invitation notice? You can personalize it by using formatting.

Frances


--
Help available from Groups.io help and GMF wiki.

?


New to this manager group but not Groups.io: inviting members

 

I moderate two Group.io instances.

I invited two members today and have before. I don't think they understand there are two Groups.io instances they need to join. When I sent the invites to them, I noticed that only one invite was sent. I checked the member list, and neither of them is there. What might cause this??

Note that I'm asking here before moving on to Groups.io support email. Redirect me if this isn't the right location.?

Thanks a lot.

Regina


Locked Re: Heic photo files #photos

Glenn Glazer
 

On 03/04/2024 14:24, Larry Finch wrote:
?

On Mon, Mar 4, 2024 at 5:09?PM Dan Tucker <antiquetuck@...> wrote:

I wish I had ¡®the answer¡¯ for this anomaly.? I do know what causes it. .heic photos are MAC Format. Why in the hell Mac came up with something that isn¡¯t sharable/viewable by others

?

?
That is NOT correct; MAC (Apple) did not come up with it. HEIC is a standard published in 2013 by MPEG, the same organization that created JPEG and MPEG formats. It is an encoding that provides higher resolution photos and videos than JPEG/MPEG but still take up less space than JPEG/MPEG. While Apple was the first to?adopt it in 2017, Google followed shortly after, and it is supported on Android phones, Windows 11 (Windows 10 with an update), and virtually all photo management and editing apps released in the past 5 years or so.
?
Website developers are the odd ones out in not supporting HEIF (the umbrella standard for HEIC).

Best,
Larry

Maybe this list isn't the best place for holy wars over image formats.

Best,

Glenn
<glenn.tga>

[YOUR MODERATORS AGREE! If you want something to change, please take this discussion where it will do some good ().]

--
Sic Semper Tyrannis


Locked Re: Heic photo files #photos

 

I agree, and have brought this HEIC question up before.
?
Craigslist and Facebook accept HEIC. Groups.io and Meetup do not.
?
How about it, Groups.io? Please get on the technology bandwagon when it is the right thing to do. I think it is.
?
AllTheBest.

? ? ~Mike


Locked Re: Heic photo files #photos

 

Both Windows 11 and Adobe now recognize and process HEIC/HEIF files. The reason for adoption is that it's small, fast and accurate.? FireFox doesn't understand it, so if you use a URL to access HEIC/HEIF files, FF will ask you where to save it.? Also, while Adobe understands how to READ such files, it either won't or can't save in that format.? My wife's been an iPhone use for many years, but only when she got an iPhone 11s did her pictures begin to be stored as HEIC/HEIF.

Re size, I have a JPG file that's about 9MB, while the image it was converted from is only 3MB.? To my eye they look identical.? Also, while JPG is a lossy format, that isn't true for HEIC/HEIF files.

FireFox, Adobe and Windows 11 also understand the relatively new format used in WEBP files.? That's more protection than anything else, but now that Adobe can read and write them, that's mostly irrelevant.

Metta,
Ivan


On Mon, Mar 4, 2024 at 3:10?PM Larry Finch <Finches@...> wrote:
I find it discouraging that 11 years after the HEIF/HEIC format standard was published, and 7 years after Apple was the first to adopt it, that many websites still aren't capable?of rendering it. All newer photo management and editing apps support it, including Windows 11, so there's no excuse anymore.

Larry

On Mon, Mar 4, 2024 at 4:45?PM Annick Phillips <annick@...> wrote:
One of my members uploaded some photos to her album that have the .heic extension. I could not see those photos at the group website...only a blank screen. I was assuming that IO Groups could only handle jpeg photos, but she told me she could see those photos in her album. I am using Windows 11 and MS Edge. So, is it my computer??
Annick



--
Ivan Van Laningham
God N Locomotive Works
Army Signal Corps:? C? Chi, Class of '70
Author:? Teach Yourself Python in 24 Hours