On 5/22/2018 10:45 PM, John T wrote: [Mod note: see Easy Yahoo Group Transfer </yahootransfer>, in particular the note in red] Perhaps also emphasize Yahoo on this statement there: We will accept the invite and then send you an email directing you to make the [email protected] member a moderator *of your Yahoo group*. -- Bill
|
Yes, it shows my name and my identification as logged in. No better than yahoo
toggle quoted message
Show quoted text
On May 23, 2018, at 6:38 AM, Frances < frances@...> wrote: Does this group show up in the list Your Groups - in the blue bar at the top of the screen? If not, it would seem that you are not a member, at least not with that email account.
Frances
|
I wasn't clear what I was responding to. My comment was intended to be for the missing step in
>Once the invite has been accepted, then you need to go to the Easy Yahoo Transfer page and start the process.
Randy T
Randy,
He can't do that yet since there is nobody on the Yahoo group list to make moderator if the invite has not been accepted.
...
Regards
Bruce Smith
|
The Maximum Photo Size setting reduces any uploaded photos to that size, it doesn't reject them.? The size when viewed online may also be different than stored size.? I limit one of my groups to 312x312, but they show as about double that on my monitor. For email size, it reduces them before sending them out.? If they're sent as attachments, that can be further limited so it's a link when it's over a certain size. Several of our members are on slow services, so I try to be as accommodating as I can.? I remember those days well since I only got 'reasonable' speed and capacity about 3 years ago. Duane -- Help: /static/helpGMF's Wiki: /g/GroupManagersForum/wikiSearch button at the top of Messages list A few site FAQs: /static/pricing#frequently-asked-questions
|
It is my understanding that Groups.io does automatically resize. If you check settings, the photo section says:
Max Size In Photos Section?
Automatically resize photos uploaded to the photos section that are larger than a specific size.
?
Max Size In Email?
Automatically resize photos that are larger than a specific size in emails.
Frances
|
|
|
Does this group show up in the list Your Groups - in the blue bar at the top of the screen? If not, it would seem that you are not a member, at least not with that email account.
Frances
|
Group:
I have had complaints that the large photo size allowed took too long to download.
So I changed it to 1024X1024 for photos in a message, and 2048x2048 in the Photos section.
Now I get complaints that this will reduce messages and annoy subscribers when they find their large photo is rejected.
Subscribers feel that the Group settings should not be determined by those with slow services.
Is there any way the underlying software can automatically reduce the submitted photo sizes to the value set in the Settings?
This is instead of rejecting the photo.
.
It is not a comment on the quality of the resulting photo, since 1024 is reasonable for the purpose here.
No photos in my technical-purposed Group will ever be made into a 8x10 portrait.
And the lower value settings require all members to reduce the size of their photo before posting.
Thanks,
Richard
Anyway, if someone wants the large original they can get it from the original poster.
|
Even I¡¯m logged in, the messages in my group NB6GC do not show me a Reply button?
|
Randy,
He can't do that yet since there is nobody on the Yahoo group list to make moderator if the invite has not been accepted.
I'm now about a week out from sending two invites for the last of the groups I am moving. That's a bit longer than the previous 3 groups took, but for now I assume that the process is ongoing as the Groups.io transfer page says my invite has been received and I should hear soon.
Regards
Bruce Smith
|
John
I beg to differ. If you click the "Yahoo Group Instructions" button you get a list of steps that are needed. At the top you see a note in pink background that reads " NOTE: You must start the transfer process for your group?before?you send an invite to [email protected]. If you sent an invite before starting the transfer process, and [email protected] is not already a member of your group, you will need to send another invite.
Prasad
On Wednesday, May 23, 2018, 2:04:44 AM EDT, John T <jtslists@...> wrote:
On Tue, May 22, 2018 at 02:41 pm, Thomas Kramer wrote:
It wasn't until I looked here that I realized the "[email protected]"
invitation had to be sent from Yahoo group.
How long has it been since you realized the invite had to be sent from your Yahoogroup?? ? All the other attempts are meaningless.?
?
Have you checked your Yahoogroup to see if the invitation was accepted? (check your member list)
?
Once the invite has been accepted, then you need to go to the Easy Yahoo Transfer page and start the process.
[Mod note: see Easy Yahoo Group Transfer, in particular the note in red] --
John T - Join us at SciFi_Discussion
19+ Years and still going strong :)
https://sciencefiction.groups.io
|
toggle quoted message
Show quoted text
From: [email protected] <[email protected]> On Behalf Of John T
Sent: Tuesday, May 22, 2018 9:46 PM
To: [email protected]
Subject: Re: [GMF] [email protected] not working for me ?
On Tue, May 22, 2018 at 02:41 pm, Thomas Kramer wrote:
It wasn't until I looked here that I realized the "[email protected]"
invitation had to be sent from Yahoo group.
How long has it been since you realized the invite had to be sent from your Yahoogroup?? ? All the other attempts are meaningless.? Have you checked your Yahoogroup to see if the invitation was accepted? (check your member list) Once the invite has been accepted, then you need to go to the Easy Yahoo Transfer page and start the process.
[Mod note: see Easy Yahoo Group Transfer, in particular the note in red]
--
John T - Join us at SciFi_Discussion 19+ Years and still going strong :)
|
On Tue, May 22, 2018 at 02:41 pm, Thomas Kramer wrote:
It wasn't until I looked here that I realized the "[email protected]"
invitation had to be sent from Yahoo group.
How long has it been since you realized the invite had to be sent from your Yahoogroup?? ? All the other attempts are meaningless.?
?
Have you checked your Yahoogroup to see if the invitation was accepted? (check your member list)
?
Once the invite has been accepted, then you need to go to the Easy Yahoo Transfer page and start the process.
[Mod note: see Easy Yahoo Group Transfer, in particular the note in red] --
John T - Join us at SciFi_Discussion
19+ Years and still going strong :)
https://sciencefiction.groups.io
|
Hi Tom
Have you clicked the green button "Start a New Transfer" and entered name of Yahoo group followed by name of the new group, etc? That is the Step 1. Inviting [email protected] is the second step and must be done after Step 1. There is clearly worded note saying this. If you just send invites without going through Step 1 it will not work.?
Good luck and 73 Prasad AB3EH
On Tuesday, May 22, 2018, 5:41:37 PM EDT, Thomas Kramer <tkramer@...> wrote:
I have tried nearly a dozen times to get my Yahoo group:
gotten an email back.? I find the instructions some what vague.? I can't
figure out what I am doing wrong.
I am labeled as owner of the Yahoo group, I was a moderator but then the
owner transferred that to me.
invitation had to be sent from Yahoo group.
Useful answers but no snarky suggestions are welcome.
Tom NQ7R? cadxa.groups.io
--
[ad trimmed by moderator]
|
Mark said some time ago that he was consulting his lawyers on matters relating to GDPR, and that he¡¯d get back to us when there was anything to tell us. ? I haven¡¯t seen anything further on this, and GDPR is looming large. Have I missed something? ? My groups are not used for marketing, and in fact have no commercial significance at all: they are purely technical discussion groups relating to specific IT technologies. I have seen no guidance relating to people in my situation who just happen to be the ¡®owner¡¯ or moderator of a group, that is not related to any kind of commercial or charitable organisation. ? I¡¯d be grateful if anyone can give any concrete, specific, valid information on this. If your reply would include the words ¡®I am not a lawyer, but in my opinion ¡¡¯, please don¡¯t bother ¨C I don¡¯t need opinions from non-lawyers. ? Thanks ? Richard
|
Denver Fox,
I think that is what I'll need to do (hold off the Direct add until launch day).?
My mess in yahoo had all sorts of permutations (In Yahoo and shouldn't be, not in Yahoo and should be, Mismatch email address between Yahoo and our club, No name in yahoo, Mismatch name in Yahoo, etc).? All of these are being cleaned up as part of the move.? I'm doing this by exporting the Groups.IO member list into Excel and also exporting the Club member list from Word Press into that Excel and then writing formulas that highlight the discrepancies.? Then I fix the issues and repeat till I get a clean sheet.? By delaying the Direct Add of missing folks, I won't get that clean sheet till after go live but I can cope with that.?
Thanks for the suggestion.
Dan
|
I have tried nearly a dozen times to get my Yahoo group: cadxa_share1@yahoo groups.com transferred to groups.io. I put " [email protected]" into the invitation box and send but I have never gotten an email back. I find the instructions some what vague. I can't figure out what I am doing wrong. I am labeled as owner of the Yahoo group, I was a moderator but then the owner transferred that to me. It wasn't until I looked here that I realized the " [email protected]" invitation had to be sent from Yahoo group. Useful answers but no snarky suggestions are welcome. Tom NQ7R cadxa.groups.io -- [ad trimmed by moderator]
|
?
Finally good news. It now says invite has been received. I can now wait..?
?
Prasad
?
On Monday, May 21, 2018, 10:24:54 PM EDT, Prasad Agrahar via Groups.Io <ad_prasad@...> wrote:
?
?
?
Shal
?
Thanks again. I started the transfer using the form. I hope the agent will see my request to move "FT-ONE".?
?
Thanks
Prasad
[excess quote trimmed by moderator]
|
What, exactly, is the deal with Slack Member Sync. Like Jeff, I was tempted to change over to groups.io exactly because of this advertised feature. But there is zero help anywhere on how to do this. I even pinged tech support and got crickets chirping for 3 days now.
|
Moderating Files & Photos?
If you have Files set to "subscribers can view, moderators can?upload" there is still an "Upload file" button when you click on the Files tab. ?If you click on it, it takes you through the upload file procedure, but when you click "Add" you are returned to the home page with a message at the top saying "You do not have permission to access that page." ?If that is the case, then why is the upload button there? ?(The upload button does not appear in the Photos section if it is set to the same permission level.)
Am I missing something? ?What I would like to do is "moderate" Files and Photos, requiring a moderator to approve them before posting. Is there a way to moderate File and Photos?
Peace,
Tom
|
Duane
Frances
Bruce Smith
Thomas Kramer
Tom Vail