Keyboard Shortcuts
ctrl + shift + ? :
Show all keyboard shortcuts
ctrl + g :
Navigate to a group
ctrl + shift + f :
Find
ctrl + / :
Quick actions
esc to dismiss
Likes
- DXLab
- Messages
Search
|
Re: Another Pathfinder/QRZ problem?
On Pathfinder's Config window, What URL is shown for QRZ.com ?
toggle quoted message
Show quoted text
73, Dave, AA6YQ -----Original Message-----
From: dxlab@... [mailto:dxlab@...]On Behalf Of pcooper Sent: Tuesday, September 01, 2009 11:58 AM To: dxlab@... Subject: [dxlab] RE: Another Pathfinder/QRZ problem? Dave and the group, I just started PF to check an address, and it nicely told me a couple of things had been updated, but I am now getting a Google page whenever I try to find a call in QRZ. It appears to work OK with Buckmaster, but QRZ seems to direct me to a Google search page for the call in question. I tried QRZ in a browser window, and that works OK, but it still won't work with PF. I even tried closing and restarting PF, but that had no effect. Any one else getting this problem?? 73 de Phil GU0SUP ------------------------------------ Yahoo! Groups Links Checked by AVG - www.avg.com Version: 8.5.339 / Virus Database: 270.13.72/2337 - Release Date: 09/01/09 06:52:00 |
|
Re: Another Pathfinder/QRZ problem?
I had this problem yesterday
toggle quoted message
Show quoted text
evidently QRZ changed their format for requests? I had to go to Pathfinder config and change to {TargetCallsign} --- In dxlab@..., " pcooper" <pcooper@...> wrote:
|
|
Re: Another Pathfinder/QRZ problem?
pcooper
Dave and the group,
I just started PF to check an address, and it nicely told me a couple of things had been updated, but I am now getting a Google page whenever I try to find a call in QRZ. It appears to work OK with Buckmaster, but QRZ seems to direct me to a Google search page for the call in question. I tried QRZ in a browser window, and that works OK, but it still won't work with PF. I even tried closing and restarting PF, but that had no effect. Any one else getting this problem?? 73 de Phil GU0SUP |
|
Winwarbler frequency readout sourced from dxlabs-hrd gateway
Jeff Blaine AC0C
Is there a way to get Win Warbler to grab the frequency from the dxlabs_hrd gateway v1.02?
All the other dxlabs programs can see the frequency from that applet, but I for some reason cannot seem to figure out how to get Win Warbler to read it from anything other than commander. Appreciate any suggestions! 73/jeff/ac0c |
|
Re: eqsl error trying to sync...
Jim McHale
Rich,
toggle quoted message
Show quoted text
Thank you - It was the qth nickname... I must have defined it sometime in august...and just never resync'd.... 73s -jim NM1W Rich - W3ZJ wrote:
|
|
Re: eqsl error trying to sync...
I don't see any problem with your eQSL account John and I can't duplicate that problem from here. Make sure that your QSL Configuration panel for eQSL does *NOT* define a QTH Nickname for your account because your on-line account does not have a Nickname.
toggle quoted message
Show quoted text
73, Rich - W3ZJ eQSL.cc Support Volunteer Jim McHale wrote: I've had this problem for past week or so... Also it shows up in the |
|
eqsl error trying to sync...
Jim McHale
I've had this problem for past week or so... Also it shows up in the latest dxkeeper 8.1.5;
I can upload qsos to eqsl, but when I click "sync eQSL.cc QSLs" I get this error msg: Error message from eQSL.cc: No such Username/Password found I've checked the username password and its correct; I can login to eqsl using them.. Anyone else seeing this issue or know of a workaround? Thanks -jim NM1W |
|
Re: DXKeeper 8.1.5 is available
Here's a properly formatted URL for the new documentation file mentioned below:
toggle quoted message
Show quoted text
<> 73, Dave, AA6YQ --- In dxlab@..., "aa6yq" <aa6yq@...> wrote:
|
|
DXKeeper 8.1.5 is available
This release
- ensures that the Address Editor window is properly displayed (tnx to John K1ESE and Rich W3ZJ) - on the main window's "Check Progress" tab, renames the "Hungary" button to "WAHUC" - generates a "Worked All Italian Provinces" (WAIP) progress report - adds a new AwardInfo.htm documentation file that shows what items to log for each award supported by DXKeeper (see < Information Needed for Award Tracking> or click one of DXKeeper's Help buttons and navigate to the "Logging Information needed for Award Tracking" topic in the "Logging and Managing QSOs" section) - updates the index.htm, Log.htm, Progress.htm, and Scripts.htm documentation files DXKeeper 8.1.5 is available via the DXLab Launcher and via <> 73, Dave, AA6YQ |
|
Re: Another Pathfinder/QRZ problem?
-----Original Message-----AA6YQ comments below From: dxlab@... [mailto:dxlab@...]On Behalf Of Mario Aviles Sent: Monday, August 31, 2009 9:06 PM To: dxlab@... Subject: Re: [dxlab] Another Pathfinder/QRZ problem? Hi: I tried this and now it is trasferring data from QRZ.COM to Winwarbler which is something it did not do before, however my problem now is that the info is not in the correct fields. For example, I tried my callsign and on Name I get AN on QTH I get Mario Aviles. So there is something wrong with the fields match. call (via DXKeeper and Pathfinder), WinWarbler's "QSO Info" window isQRZ.com is back up. When I direct WinWarbler to perform a lookup on your properly populated with your name, QTH, Continent, CQ zone, ITU zone, and grid square. 73, Dave, AA6YQ |
|
Re: Another Pathfinder/QRZ problem?
QRZ.com appears to be broken at the moment. Let's see what happens after its
toggle quoted message
Show quoted text
repaired. 73, Dave, AA6YQ -----Original Message-----
From: dxlab@... [mailto:dxlab@...]On Behalf Of Mario Aviles Sent: Monday, August 31, 2009 9:06 PM To: dxlab@... Subject: Re: [dxlab] Another Pathfinder/QRZ problem? Hi: I tried this and now it is trasferring data from QRZ.COM to Winwarbler which is something it did not do before, however my problem now is that the info is not in the correct fields. For example, I tried my callsign and on Name I get AN on QTH I get Mario Aviles. So there is something wrong with the fields match. Any ideas? 73???s Mario /YS1MAE ----- Original Message ----- From: Anela Karacic To: dxlab@... Sent: Monday, August 31, 2009 7:55 AM Subject: Re: [dxlab] Another Pathfinder/QRZ problem? They made some changes on QRZ.com Now you need to change URL on Pathfinder. Puth this one: {TargetCallsign} You need to change this on CONFIG, and do not forget todo the same on a QRZ botton (ctrl + left mouse botton) GL and 73 Anela - e74ee ________________________________ From: kbandy <kj9b@...> To: dxlab@... Sent: Monday, August 31, 2009 2:18:07 PM Subject: [dxlab] Another Pathfinder/QRZ problem? Please excuse me if this has already been hashed over, but I scanned through recent messages on the yahoogroup, and didn't see any mention of this problem. I hadn't been on the rig for a few days, and Sunday evening looked to see what I could find. When starting up Pathfinder, I noticed there were a couple of updates it wanted to do. After doing those, I worked a little PSK, and when WinWarbler would try to find a name and QTH by using Pathfinder, I would get a script error from QRZ.com. If I went to the Pathfinder window, the QRZ opening web page would be up with the target callsign in the Pathfinder window, at which time I could click on the "QRZ" button in Pathfinder, and it would go to the proper record. I figured the PC might have something "sideways", so I rebooted the PC. After reboot and restarting the suite, I had the same problems. When trying it this morning, I don't get the script error, but QRZ still only goes to the opening page, and I get a dxlab window that pops up and says the target callsign wasn't found (xx0xx not found). I have all the latest versions of all components of the suite. Thanks in advance for any help. 73, Ken KJ9B ------------------------------------ Yahoo! Groups Links No virus found in this incoming message. Checked by AVG - www.avg.com Version: 8.5.339 / Virus Database: 270.13.72/2337 - Release Date: 08/31/09 05:50:00 |
|
Re: Another Pathfinder/QRZ problem?
Mario Aviles
Hi:
toggle quoted message
Show quoted text
I tried this and now it is trasferring data from QRZ.COM to Winwarbler which is something it did not do before, however my problem now is that the info is not in the correct fields. For example, I tried my callsign and on Name I get AN on QTH I get Mario Aviles. So there is something wrong with the fields match. Any ideas? 73?s Mario /YS1MAE ----- Original Message -----
From: Anela Karacic To: dxlab@... Sent: Monday, August 31, 2009 7:55 AM Subject: Re: [dxlab] Another Pathfinder/QRZ problem? They made some changes on QRZ.com Now you need to change URL on Pathfinder. Puth this one: {TargetCallsign} You need to change this on CONFIG, and do not forget todo the same on a QRZ botton (ctrl + left mouse botton) GL and 73 Anela - e74ee ________________________________ From: kbandy <kj9b@...> To: dxlab@... Sent: Monday, August 31, 2009 2:18:07 PM Subject: [dxlab] Another Pathfinder/QRZ problem? Please excuse me if this has already been hashed over, but I scanned through recent messages on the yahoogroup, and didn't see any mention of this problem. I hadn't been on the rig for a few days, and Sunday evening looked to see what I could find. When starting up Pathfinder, I noticed there were a couple of updates it wanted to do. After doing those, I worked a little PSK, and when WinWarbler would try to find a name and QTH by using Pathfinder, I would get a script error from QRZ.com. If I went to the Pathfinder window, the QRZ opening web page would be up with the target callsign in the Pathfinder window, at which time I could click on the "QRZ" button in Pathfinder, and it would go to the proper record. I figured the PC might have something "sideways", so I rebooted the PC. After reboot and restarting the suite, I had the same problems. When trying it this morning, I don't get the script error, but QRZ still only goes to the opening page, and I get a dxlab window that pops up and says the target callsign wasn't found (xx0xx not found). I have all the latest versions of all components of the suite. Thanks in advance for any help. 73, Ken KJ9B |
|
Re: Solar History display question
G4MUL
toggle quoted message
Show quoted text
----- Original Message -----
From: "Dave AA6YQ" <aa6yq@...> To: <dxlab@...> Sent: Monday, August 31, 2009 5:11 PM Subject: RE: [dxlab] Solar History display question AA6YQ comments below I agree Dave, leave it as it is please !would degrade intelligibility for many ops, given the existing verticalI suspect that adding horizontal connecting lines to the current chart Regards Dave g4mul.hfdx@... |
|
Re: QSL aging
OK, thanks for help Dave,
my best regards, 73, de Z35T/Ozren ________________________________ From: Dave AA6YQ <aa6yq@...> To: dxlab@... Sent: Monday, August 31, 2009 6:03:58 PM Subject: RE: [dxlab] QSL aging -----Original Message-----AA6YQ comments below From: dxlab@... [mailto:dxlab@...]On Behalf Of OZREN SPASKOV Sent: Monday, August 31, 2009 5:20 AM To: dxlab@... Subject: [dxlab] QSL aging Hi Dave, I am using DXKeeper more then one year, don't need to say that's EXCELLENT, Brilliant etc... I am interesting is some how possible filtering QSL aging on DXKeeper's LogQSO window? It will be easy to aging all missed QSL cards for band/mode, maybe IOTA, etc. ( I don't know how ?) 1. on the Config window's Awards tab, make sure the "Expiration age" box inTwo steps: the "QSL Aging" panel is blank. (along the right margin, half-way down) 2. on the Main window's "Check Progress" tab, click the "Card Aging" button < Aging>For a description of this function, see Award Progress" section's "QSL Card Aging Analysis" topic.or click one of DXKeeper's Help buttons and navigate to the "Checking 73, Dave, AA6YQ ------------------------------------ Yahoo! Groups Links |
|
Re: Solar History display question
FireBrick
Kinda off topic, but any plot of the solar flux is pretty simple these days seeing as it is stuck at 68 and this is the 51st day without a sunspot. I think the programming effort would better be applied to the "Flux Enhancement Module" You know, a slide bar were we could drag the flux from 68 up to 200 while we are operating, and then put it back when we QRT for the day! :-)I second this feature request. I'd be happy if the slider just went to 120 LOL |
|
Re: Solar History display question
At 01:11 PM 8/31/2009, you wrote:
Kinda off topic, but any plot of the solar flux is pretty simple these days seeing as it is stuck at 68 and this is the 51st day without a sunspot. I think the programming effort would better be applied to the "Flux Enhancement Module" You know, a slide bar were we could drag the flux from 68 up to 200 while we are operating, and then put it back when we QRT for the day! :-)-----Original Message-----AA6YQ comments below 73, Paul VE1DX |
|
Re: Solar History display question
-----Original Message-----AA6YQ comments below From: dxlab@... [mailto:dxlab@...]On Behalf Of vk2ca Sent: Monday, August 31, 2009 7:19 AM To: dxlab@... Subject: [dxlab] Solar History display question Hi All Would it be possible to have the dots joined in the History display with relevant coloured lines. Just an asthetic suggestion but my eyes find all the dots tend to meld over time. I know I can separate the readings but I find lines tend to show a trend more dynamically. Nothing major....just a suggestion. would degrade intelligibility for many ops, given the existing verticalI suspect that adding horizontal connecting lines to the current chart lines used to show the day's range for each parameter. there are A and K boxes. Try unchecking these boxes; is the solar flux trendIn the "Solar and Geomagnetic Parameters" window's lower left corner, now easier to comprehend? There's an SFI box in the lower right corner that can be unchecked when you want to focus on the A or K trend. 73, Dave, AA6YQ |
|
Re: QSL aging
-----Original Message-----AA6YQ comments below From: dxlab@... [mailto:dxlab@...]On Behalf Of OZREN SPASKOV Sent: Monday, August 31, 2009 5:20 AM To: dxlab@... Subject: [dxlab] QSL aging Hi Dave, I am using DXKeeper more then one year, don't need to say that's EXCELLENT, Brilliant etc... I am interesting is some how possible filtering QSL aging on DXKeeper's LogQSO window? It will be easy to aging all missed QSL cards for band/mode, maybe IOTA, etc. ( I don't know how ?) 1. on the Config window's Awards tab, make sure the "Expiration age" box inTwo steps: the "QSL Aging" panel is blank. (along the right margin, half-way down) 2. on the Main window's "Check Progress" tab, click the "Card Aging" button < Aging>For a description of this function, see Award Progress" section's "QSL Card Aging Analysis" topic.or click one of DXKeeper's Help buttons and navigate to the "Checking 73, Dave, AA6YQ |
|
Re: Another Pathfinder/QRZ problem?
Ken Bandy
Thanks for the quick reply, Anela. I had made the changes you suggested
toggle quoted message
Show quoted text
when the problem first surfaced a week or so ago. However, I had since changed my workspaces without updating the workspace settings, so they had reverted to their previous settings. I had reset the settings on the QRZ "button" on Pathfinder, but had forgotten about the one in the config panel. That took care of it. Thanks again! 73, Ken KJ9B -----Original Message-----
From: Anela Karacic [mailto:anelae74ee@...] Sent: Monday, August 31, 2009 9:56 AM To: dxlab@... Subject: Re: [dxlab] Another Pathfinder/QRZ problem? They made some changes on QRZ.com Now you need to change URL on Pathfinder. Puth this one: {TargetCallsign} You need to change this on CONFIG, and do not forget todo the same on a QRZ botton (ctrl + left mouse botton) GL and 73 Anela - e74ee ________________________________ From: kbandy <kj9b@...> To: dxlab@... Sent: Monday, August 31, 2009 2:18:07 PM Subject: [dxlab] Another Pathfinder/QRZ problem? Please excuse me if this has already been hashed over, but I scanned through recent messages on the yahoogroup, and didn't see any mention of this problem. I hadn't been on the rig for a few days, and Sunday evening looked to see what I could find. When starting up Pathfinder, I noticed there were a couple of updates it wanted to do. After doing those, I worked a little PSK, and when WinWarbler would try to find a name and QTH by using Pathfinder, I would get a script error from QRZ.com. If I went to the Pathfinder window, the QRZ opening web page would be up with the target callsign in the Pathfinder window, at which time I could click on the "QRZ" button in Pathfinder, and it would go to the proper record. I figured the PC might have something "sideways", so I rebooted the PC. After reboot and restarting the suite, I had the same problems. When trying it this morning, I don't get the script error, but QRZ still only goes to the opening page, and I get a dxlab window that pops up and says the target callsign wasn't found (xx0xx not found). I have all the latest versions of all components of the suite. Thanks in advance for any help. 73, Ken KJ9B |
to navigate to use esc to dismiss