Thanks for the quick reply, Anela. I had made the changes you suggested
when the problem first surfaced a week or so ago. However, I had since
changed my workspaces without updating the workspace settings, so they had
reverted to their previous settings. I had reset the settings on the QRZ
"button" on Pathfinder, but had forgotten about the one in the config panel.
That took care of it.
Thanks again!
73,
Ken
KJ9B
toggle quoted message
Show quoted text
-----Original Message-----
From: Anela Karacic [mailto:anelae74ee@...]
Sent: Monday, August 31, 2009 9:56 AM
To: dxlab@...
Subject: Re: [dxlab] Another Pathfinder/QRZ problem?
They made some changes on QRZ.com
Now you need to change URL on Pathfinder.
Puth this one:
{TargetCallsign}
You need to change this on CONFIG, and do not forget todo the same on a QRZ
botton (ctrl + left mouse botton)
GL and 73
Anela - e74ee
________________________________
From: kbandy <kj9b@...>
To: dxlab@...
Sent: Monday, August 31, 2009 2:18:07 PM
Subject: [dxlab] Another Pathfinder/QRZ problem?
Please excuse me if this has already been hashed over, but I scanned through
recent messages on the yahoogroup, and didn't see any mention of this
problem.
I hadn't been on the rig for a few days, and Sunday evening looked to see
what I could find. When starting up Pathfinder, I noticed there were a
couple of updates it wanted to do. After doing those, I worked a little
PSK, and when WinWarbler would try to find a name and QTH by using
Pathfinder, I would get a script error from QRZ.com. If I went to the
Pathfinder window, the QRZ opening web page would be up with the target
callsign in the Pathfinder window, at which time I could click on the "QRZ"
button in Pathfinder, and it would go to the proper record.
I figured the PC might have something "sideways", so I rebooted the PC.
After reboot and restarting the suite, I had the same problems. When trying
it this morning, I don't get the script error, but QRZ still only goes to
the opening page, and I get a dxlab window that pops up and says the target
callsign wasn't found (xx0xx not found).
I have all the latest versions of all components of the suite.
Thanks in advance for any help.
73,
Ken
KJ9B
