开云体育

+ AA6YQ comments below + I suggest the following steps: 1. terminate all applications 2. reboot Windows 3. without starting any applications, perform the Microsoft Jet repair + Any joy? 73, Dave,

Thanks Dave. I have followed the instructions and nothing has changed. Since my installation is a "Click To Run" installation, there is actually no instruction to edit the registry. I have run the

I did not have a DLL error. My problem was due to a configuration error in the Marathon Award ... for some reason the Marathon Year was set to 2023 and Class set to Challenge (an impossible

+ AA6YQ comments below

# more AA6YQ comments below # In your first post, you wrote " All my QSOs on QO100 Satellite are showing the wrong Tx frequency (10Ghz instead of 2.4Ghz)". + If your your Flex Signature transceiver's

I connect my Palstar HF-Auto Antenna ‘Tuner’ to my computer with a Dtech USB to DB-9 FTDI cable. And, I use W1TR “HFAUTO (Server)” software to connect to Commanders UDP Network Service for

Hi Joe, Did you try the fix suggested in /g/DXLab/message/228848 ? If so, was it successful? I am hesitant to do the registry edit unless it is an absolute last resort.? I am hoping

+ What frequencies does Commander display when you're making a QSO via the QO100 satellite? I just tried using FT8 and commander shows as 10,489,540.00 this is what slice A is set to and it does not

+ AA6YQ comments below + You can do that because Commander can be configured to link frequency-dependent device codes to a user-defined slider, which in turn generates CAT commands sent to your

+ KC4KK I am trying to use the frequency data in Commander to select the antenna.? ?Using the Frequency Dependent Device definitions and a Slider I am able to do this with the JST-245.? My approach

+ AA6YQ comments below

+ AA6YQ comments below + What frequencies does Commander display when you're making a QSO via the QO100 satellite? + What frequency does WSJT-X display when you're making a QSO via the QO100

+ AA6YQ comments below + Thanks, Brian. The description you sent is not the Kenwood CAT protocol, nor is it OTRSP; it's not a protocol that Commander supports. + If there's a way to configure your amp

Yes, if you convert your image (jpg) to bmp and use it as the background for the DXKeeper generated card as I documented in message 229021 </g/DXLab/message/229021> The resulting file

I would like that option! Thanks Dave.

Dave, I am trying to set the antenna switch on the amp to overcome the auto-band select limitation.? The problem is that amp has band definitions of 20-15 and 12-10.? If the amp selects the antenna

Dave. I talked to Palstar for same information and received the following info below. I can see the data and figured out how to send the command to turn the Remote Status Info on with my serial

How do I log Satellite QO100 QSOs in DXKeeper correctly using Flex 6600? All my QSOs on QO100 Satellite are showing the wrong Tx frequency (10Ghz instead of 2.4Ghz). When I look at the Logged QSO in

Dave Ok. 73 F5PHW Phil Envoyé de mon téléphone

+ AA6YQ comments below + QSOs on 60m are not valid for ARRL DXCC or WAS awards - to discourage the use of this very narrow band for DXing. + No, for the same reason. 73, Dave, AA6YQ