Re: Frequency Dependent Device output to Serial Port
|
I connect my Palstar HF-Auto Antenna ¡®Tuner¡¯ to my computer with a Dtech USB to DB-9 FTDI cable.?
And, I use W1TR ¡°HFAUTO (Server)¡± software to connect to Commanders UDP Network Service for Frequency and Antenna selection.?
I do not know if the W1TR software will work directly with your Palstar LA-1K¡ªask Palstar and/or W1TR.
You will have to make adjustments to the W1TR software to set-up the UDP to Commander connection.
I use the 10 foot cable and it works without any issues.
?
73,
Dave, w6de
?
?
?
toggle quoted message
Show quoted text
From: [email protected]
<[email protected]> On Behalf Of Brian Rehmer via groups.io
Sent: 2 May, 2025 16:54
To: [email protected]
Subject: Re: [DXLab] Frequency Dependent Device output to Serial Port
?
I am trying to use the frequency data in Commander to select the antenna.? ?Using the Frequency Dependent Device definitions and a Slider I am able to do this with the JST-245.? My approach here is the same, but send message to the Amp.?
I agree a separate app could do this and so far this is none out there.? I was trying this way before take on the adventure to get an app to work off of the UDP data you described.
|
