Good Afternoon
Two SC Questions:
1-Can SC be configured to save the last filter I was using? I have
SC set so the filter buttons are off the screen, so at every startup I
need to move things around to activate 'my' filter.
2-Eliminating Beacon '/B' stations. I know this has been covered and
I have set /B as an invalid call sign, but they just keep on coming.
Any information would be appreciated.
One WW Question:
1- My radio (FT1000D) has two memories per band for the main VFO. I
generally keep one memory in the CW portion and the other in the RTTY
portion of any given band. Now using 20M as an example, one memory is
14025 CW and the other is 14085 FSK RTTY. The question/problem is when I see
a RTTY spot, I switch to the RTTY memory and listen for the station. If
the station is heard, I set the mode on the radio to LSB (AFSK RTTY) and
then click the RTTY mode button in WW. At this point, WW sets both memories
to the RTTY LSB frequency, there by destroying my ability to quickly go back
to CW. Is there a set up or button pushing sequence that will just set
WW to RTTY, open up the RTTY screen and do nothing with the memories on the
radio?
73 - Jim - K8SIA
