开云体育

Jack . . .

On Fri, 23 Sep 2022 15:52:05 -0700, "Jack W4GRJ" <jack@...> wrote:

My UV82 started cycling on receive. About every 3 to 4 seconds in switches for just a moment like it is in watch mode to another freq

You may need to refer to the manual for this, but some radios have a weather
channel monitor for NOAA weather radio stations. In my Icom 5100, for example,
many people set their local WX channel up and set it to monitor the frequency
for WX alerts. This stops audio while it checks for an alert, then returns to
the frequency you've been listening to.

This might be the case here, but I don't have the radio. See if there's a
monitor function that needs to be set to off. I don't see a WX monitor function,
but look at page 17 in the manual:



look under TDR (dual watch/dual reception)

It allows the radio to periodically check to see if it's receiving a signal on
another frequency.

Make sure that's off. Menu items are described on pages 14 and 15.

If that doesn't help, perhaps someone who has the same radio can help.

Donald KX8K



----------------------------------------------------
Some ham radio groups you may be interested in:
/g/ICOM /g/Ham-Antennas
/g/HamRadioHelp /g/Baofeng
/g/CHIRP