开云体育

Hi, I bought a couple of 1701's and when they arrived they had the open GD77 firmware in them, I got the 1701 original firmware from the radioddity site, firmware v2.03, now flashing the radio back to standard the display is not the normal blue, the Baofeng name on turn on is red, so is the menu icon and the icon on the right with the speaker and x, the background is a yellow colour, There does not seem to be any issues with it but i would like the colour like my other radios, (back to blue) Can anyone throw any light on it as i've looked in the programming software and in the firmware software .ini file to see if there is a setting to alter the display colour, but i cannot find anything.

Thanks

Colin . . .


On Sat, 02 Dec 2023 11:40:51 -0800, "colin Grocutt via groups.io"
<M0byw@...> wrote:

Can anyone throw any light on it as i've looked in the programming software and in the firmware software .ini file to see if there is a setting to alter the display colour, but i cannot find anything.

Is it possible that the Baofeng has something different inside from the
Radioddity radio so that the firmware can't support what you're wanting from the
radio?


Donald KX8K



----------------------------------------------------
Some ham radio groups you may be interested in:
/g/ICOM /g/Ham-Antennas
/g/HamRadioHelp /g/Baofeng
/g/CHIRP

You may wish to try resetting the radio to factory defaults before flashing the replacement firmware.

Hi Tony, I don't know how do do this bud, There is no reset on the radios menu nor is there anything in the manual, I did try google but came up with nothing either.

I don't see what Donald, the software from the radioddity site is the baofeng firmware, I'm? not sure why it's on the radioddity site though, even going to baofengs site gives you the exact same firmware, I did think maybe it could be remnants of the GD77 firmware remaining in the radio that wasn't cleared or over written, but thats just an assumption, maybe if i reflashed the radio back to GD77, changed the colour and then flashed it back to the original baofeng firmware may do something, It's just a thought, I may give it a try if I cannot find a solution, as I said, the radios work fine, it's just the colour. lol