开云体育

Doug . . . wrote: I used a cable with the chipset you mentioned. It has something like 8 cable ends to be a more or less universal cable, and it worked fine once I sorted out where to get a driver for

Hello Group, I recently purchased a BF-T1 with cable and most places said that the driver was a prolific PL-2303, which was not the case. I tried this lead in 3 different PC's off different OpSys but

First let me say thanks for letting me join this group. I have 2) UV-5R's and 1) BF-R3 (tri-band) and a couple of other Baofeng/BTECH mobiles.? They all have their quirks, but for the most part

I used Windows 10 and didn't like it. I switched most of my computers to Windows 7. I have a tablet that has Windows 10 on it but my primary operating system is Windows 7. Microsoft is coming out with

Michael . . . <mikew5rkl@...> wrote: I suspect the driver and Windows work out which COM port to assign. If you have other COM ports assigned when you install the driver, Windows will assign a

Yes!! I reset all of the levels to give a full-range squelch control.

I'm not sure why you only have comm 3 and 4 but I have "Com6" that shows up on Chirp when selecting the comm port. I run Windows 7 and Device Manager serial port shows "Prolific Com6" which is what

Charles . . . <charles.t.dennis@...> wrote: You might also attach a PDF. Not everyone has a program to read MS Word documents. I do, and looking at your error, it looks like you have a faulty

Very good point, Donald. Yes, I'm grateful for CHIRP. Another feature that CHIRP allows is adjusting the squelch levels. The UV-5R only allows 10 levels of squelch, 0-9. The default settings for these

I am getting the following results to my efforts to program the radio so far.

Some features, such as scan skip cannot be programmed without CHIRP!

Another problem I encountered: I had to press very hard on the cable's connection to the radio. Feeling it snap into place was not sufficient...I had to intentionally press the connector firmly into

An additional note on programming repeater offsets. If the repeater uses an non-standard split, the CHIRP software accepts entering the TX frequency and the radio programs fine. When the radio is read

In addition to the others' good advice, I'll add the following. Even with two identical models of radio, it's a good idea to download each to make a template file and store the settings for each

I'm going to assume you have installed the prolific USB serial driver, connected the USB serial cable to the radio and to the computer's USB port and turned the radio ON and have launched Chirp. Make

Are you first downloading the database from the radio to set up the fields for the program to use? After that, you can copy and paste information into the spreadsheet-like interface then upload to the

I just received two UV5R Pro HT's that I purchased as a package deal and I am now trying to program them and set them up for use but I have run into some real issues. Every time I try to load a set of

I have the same prob. Annoying, but the charger still charges. Sent: Wednesday, July 28, 2021 9:22 AM To: [email protected] Subject: [Baofeng] Baofeng CH1801 charger for DM-1801 DMR radio I have a

I have a charger from day one while charging has never switched from the charge mode (RED LED) to the COMPLETED CHARGE (GREEN LED)?? It appears to charge the battery.? After a few hours I have a

Cool. I was thinking that is the case.