开云体育

Brian, I concur with Doug's (VK2XLJ) statement with recent experience with the same issue. Before Christmas, the workstation I used for programming was working fine. This workstation is Windows 10,

I had the same issue with Windows 11, I installed this driver and it sorted it, you need to install an earlier version of the prolific driver

Prog your radios on another PC that doesn't have Win10/11. As Win 10/11 will automatically update drivers, the previous editions don't. Regards, Doug VK2XLJ ________________________________ Sent:

Hi all. I purchased a baofeng a couple of years ago as a backup to my Anytone. I wanted to add some frequencies to it this week, which I haven’t done in a couple of years, and it won’t communicate

Thanks for the response Don, I cant find anything in the manual or online about it, all it says is that it indicates the channel is offline, the cps does not give any clues either, it does change but

Colin, Sorry no one has replied to this. Probably there is no one here who has that radio or, if they have it, they don't know how to do what you're asking to do. On my Anytone, I don't know how the

I have UV-18 Pro Max GPS I am convinced it is genuine, color screen, large numbers, deep voice in the menu with the ability to create zones in memory is the correct radio. But I am disappointed

Hi, I'm struggling with turning off the offline symbol on the 1701, its that little blue arrow at the top right of the screen on the right of the encryption icon, Reason i ask is because i programmed

Thanks Bob, already tried that as well. No joy. wrote: -- Regards Phil Nicholson

Hi Phil, Just googled your radio and found a utube comparison between UV18PROMAX, UV17 GPS and 1 other. The interesting bit was just before 10.00 minutes he was talking about in the settings - screen

Tried that already and same thing happened again. wrote: -- Regards Phil Nicholson

Could be worth a reset.

Got this about a week ago and powers on fine but wont power off when I switch off; it will happily drain the battery even when I switch the power off, and the radio remains on. Any suggestions?

BTW: Happy New Year To All On The Group. Unlike the Baofeng UF-17 which has a a Unofficial "CPS Unofficial Build 124j" which make it a good workable radio the(Sister like) Radioddity GC-5 has Many

Hey everyone! I've got a booger that I haven't been able to figure out on my own.? I'm working with a friends GM-15 pro and immediately found out that it is not supported for programming by either

I don't see what Donald, the software from the radioddity site is the baofeng firmware, I'm? not sure why it's on the radioddity site though, even going to baofengs site gives you the exact same

Hi Tony, I don't know how do do this bud, There is no reset on the radios menu nor is there anything in the manual, I did try google but came up with nothing either.

You may wish to try resetting the radio to factory defaults before flashing the replacement firmware.

Colin . . . <M0byw@...> wrote: Is it possible that the Baofeng has something different inside from the Radioddity radio so that the firmware can't support what you're wanting