开云体育

Hi, I have tried every possible way to install the drivers downloaded first from the official Baofeng page and then from radioddity.com but without success. I have tried all the usb ports but it is

I'm not sure how it got pinned, but I unpinned the thread and it is as the rest are now. I receive my posts by email, so I would not know if something got pinned or not unless I paid a visit to the

The topic appears to be getting stale, but I'll respond since it's pinned... Since I've recently been on an APRS kick, I ordered a second uv5r for dedicated aprs use. I was able to successfully unlock

Some of you may have already attempted to program 220 freqs on your UV5R*3 with Chirp which resulted in permanently disabling the radio's 220 ability. Here's what you must do. #1, You must use the

Yes.? See my next message: Programming Baofeng UV5RA3 & UV5RX3 With Chirp for 220 Dennis Starks Military-Radio-Guy KB?SFP

Were you able to get them working after messing things up? Donald KX8K <spike.dennis@...> wrote: ---------------------------------------------------- Some ham radio groups you may be

I messed up 2 UV5RA3(w/220) using chirp. The short of it is, you must have the current version of Chirp which requires a Window 10 64 bit machine, and you must use the Radioddity equivalent version to

Hello Group I am trying to get 2 radios programed. These? are a BAOFENG UV_-5R and a BAOFENG UV-5RPlus. After loading they both are transmitting but upon release of PTT all the I get is a short blip

My local EmComm group is trying out alerting two-tone audio alerts for severe weather events. Are BaoFeng HTs programmable to use this feature? BaoFeng website isn't clearest on this Thanks, Ed/KC3NAF

I also checked on the group website and there is no image, just a placeholder. /g/Baofeng/message/445 Maybe a link to the page where it's at instead? Donald KX8K

I did see the whole thread about the prolific driver, but I tried 3 different cables (2 FTDI and a different one that requires no driver) and none of them worked. All of my other radios worked

Your email didn't have a picture or a link to any page. Michael Kimsey MCP/MCSE/MCSA/MCITP:EA/MCITP:EDT/Security+

We’re you on this page? At the bottom is the driver link. Mick

I tried the miklor site but was not and to find a driver, just individual files that didn't seem to work. Michael Kimsey MCP/MCSE/MCSA/MCITP:EA/MCITP:EDT/Security+

Thanks, Dave. I did think about RT Systems, but couldn't justify spending the money on their software and cable on a maybe. I ended up returning the 5RH. My 5RM is a great radio, although I did order

Jim I wrestled with my UV-5RA when trying to connect. The Miklor.com site has been good for me. Using the correct driver is my issue and with the Prolific chipset I have to use the 3.2.0.0 driver.

I agree, I have never been able to get Chirp to work with any of my HT. Michael Kimsey MCP/MCSE/MCSA/MCITP:EA/MCITP:EDT/Security+ [email protected]> wrote:

I noticed you never mentioned using RT Systems. Chirp has always been a problem child? for me.? I've used RT Systems on Baofeng, Icom, Kenwood, and Yaesu.? They are always problem free and work the

Thanks, Bob. I did make sure it was plugged in completely. I even exercised the plug in and out, just in case it was an internal connectivity fluke. Still no go. I ended up sending it back.

i Black Pro Max programming with CHIRP, which baofeng model do I choose to do this?